Jump to content
SAU Community

Recommended Posts

I was having a read through the K Mon thread and it seems people like Guilt Toy and a few others are a step ahead with "reliable" power supplies for Lap Tops .

Just today I was looking at inverters at my local Jaycar outlet and they carry two kinds of Digitech units in a range of outputs ie 150/300/400w - thats the modified sine wave type , and 150/380w etc in the pure sine wave type .

I gather the pure sine wave type is better but I'm not sure which wattage level is the go and what 240AC devices that say the 380w one could run .

Also I'd like to know more about the 12v 12v power pack device as well .

Cheers and thanks , A .

If your laptop is has a common power plug on it (ie not the dell square connector) you are better off getting a 12v converter that just plugs into the cigarette lighter as you will generally find they are cheaper than getting a decent 12v > 240v inverter that wont introduce lots of signal noise. Check out the jaycar ones as they offer a few different options at fairly good prices.

My lap tops AC adapter "brick" (67x36x165) reckons its output is 20V 5a and it gets very warm .

Is a 12v 12v gasper adapter going to run this thing ?

Actually I've just checked out the AC adapters on the other two LT's in this joint and they are 19v 3.5a and 15v 2a . ? .

Yeah the pure sine wave Digitech 380w rated 240v AC inverter is ~ $240 .

What else would it be able to feed - 380 watt ?

Cheers A .

Just back from Jaycar again , they can't supply a DC DC adapter to feed this lap top 5 amps . Up to 3.5 amps only .

They suggest that I see Hardley Normals and their best offering was a white AC and DC fed charger - for $199 ...

No chance .

Any ideas ?

I use the 150w digitech without drama. $48

i bought the same one, my lappy seems to disagree with it though.

the converter only turns on for short "bursts" once every 5 seconds or so...

You have to remember that you are talking about peak power, power usage depends on CPU usage rate, your laptop won't use 5.5 amps continuously. Things like burning CD/DVD, huge data set manipulation etc will have a high power usage. We use 150 watts units for work all the time and they never run out. I can plug my dead flat laptop in, boot it up, and use it to download big [but simple] data files from loggers [try a weather station with approx 10 parameters logged every 10 minutes for two months] and it does it easily.

I'm with Adriano and co, you will be fine with the $48 special.

I'll see if Jaycar still do that 5.5 - 6a DC power supply , fella may not have known about them if he's new or was not in stock .

All this BS is over using a dated lap top with a serial port and it only wants to work on battery power and the Datalogit few a few moments - no matter how long it's charged for .

It can play a DVD movie for nearly 40 min on battery power but caves in very quickly with the Datalogit .

Am I to assume that the Datalogit has high power demands through its serial port or is it some other weird electronic glitch ? This is using the Datalogit with the supplied USB serial converter BTW ...

Yes I can hear the thoughts - why is he bothering with serial ports and not using them ?

If that USB converter dies (and they can at times) your stuffed if you don't have the RS232 serial port .

Cheers A .

Disco, with that sort of power drain, I'd be thinking that the laptop is also using the RS232 looking for a printer at the same time, burning up power trying, so you get conflicting issues. If you do use the USB is the power usage better? I'd have to say would be.

All I have used is the supplied USB/serial converter cable so far meaning USB at the lap top end .

I've stuck the missuses Toshiba 3.95a / AC power adapter into this thing to see what will happen - sky didn't fall in so cig powered 3.5a DC adapter should work ok provided the cars socket still works .

BTW I was thinking of using the socket to power the Tech Edge WB02 , is the socket going to carry it and lap top or do I really need a dedicated power supply ?

Cheers and thanks , A .

Problem solved , Jaycar DO still sell a higher powered DC auto lap top power adapter .

It's called a Power Tech Plus MP-3472 Auto Lap top Power Supply 150w .

It lets you select 15 or 16V 8.5a regulated - 18 or 19V 8a regulated - 20v 7.5a regulated - 22V 6.5a regulated - 24V 6a regulated - 150w max . Damage is $59.99 .

It's socket plug has a 15a blade fuse in it and the kit includes 9 different replaceable plugs to fit various lap tops power sockets inc a weird looking Hewlet Packard one .

Will give it a go tomorrow , cheers A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...