Jump to content
SAU Community

Recommended Posts

Thanks for the help.

Problem found and fixed. It was the old AFM wiring that in my haste i didn't sercure well enough and it had shorted on the body. Wacked a new fuse in him and started first crank.

Dropped the run in oil and filter. Chucked in some fresh Kendall oil and ventured out for a bit of a road tune tonight to clean up a bit of untidyness and gave it a few mild runs through 2nd and 3rd with 1 bar of boost. Found it to be a very linier power delivery that i think will benifit from some cam timing adjustment.

Probably back on the Dyno tomorrow to play with that and start looking at towards some more boost.

I think it's about time i sent out a big thanks to Paul at X-treme Motorsport here in Townsville for looking after the tune and keeping an eye on what I was doing throughout this project. With out his help I would never have got this far.

  • Replies 170
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...
  • 2 weeks later...

Hope Coops doesn't mind me posting this here..

http://www.qldstreetscene.com/forums/index...20&start=20

"It's repairable and the car is still pretty straight. Just some expensive and 1 off parts that will have to be binned. Pretty much just a rear end lock up, kicked out hard and ran tarmac to pull it up. Took out a small tree and stoved the front into a rock. Better luck next year. Gotta stay true to my sig. On a positive though that motor was amazing all weekend and from what i've removed so far it looks fine."

  • 4 weeks later...

Hey guys. sorry for the lack of updates as i haven't had a Pc for a while.

So far I've pretty much identified everything that's been damaged and I've started buying bits already. I bought a second hand blitz intercooler, Ordered a new custom PWR radiator, new radiator and headlight supports and also have a new oil pump input shaft as It was bent slightly by the impact from the bottom rad support. Still alot of work to do but well on the way to repair. I'll try post some picks of the damage from the rally when I have access to our own computer gear again.

Besides us crashing out we were actually doing quite well. We were running 3rd outright behind a Skelta G-force and Giant's RGM racing R35 Gtr. I would have liked to have had more opportunity to sort out its handling issues but simply ran out of time.

I'll try and get the in car footage up on youtube when i figure out how, but untill then heres some pics

Befor and afters.

At scrutineering

DSC00656.jpg

At home, all stickered up and ready to rallying

DSC00662.jpg

Where we landed looking from where we left the road

07062009081.jpg

And on the tilt tray mid way through day 2

DSC00664.jpg

DSC00665.jpg

NOTE:

You may have noticed this thread has been moved.

SAU Admin have decided to run a new section for "Projects, Overhauls and Build-ups"

As such your thread is a prime example of what we wanted to house in this section.

We have left links in the sections you originally posted also to allow easy access to the threads new home.

Any issues, please feel free to pm myself or N1GTR.

Cheers Col

  • 1 month later...
  • 1 month later...

I loaded up You tube wth a few in car Vids from the Mount Stuart Tarmac rally including the ill fated 6th run crash. Run 3 gives some idea of how taily it was and there's a couple of classic catches in this one. Enjoy

I am sorry to see mate.

Car looks beautiful and fast.

I hope you are almost done with the repair. It will be nice to see it on track again.

The last video was sad to see :thumbsup:

From the video it appeared that your rear end stepped out under brake.

What actually caused the accident?

Brake lock up, oil/gravel on the road?

First up in the morning the car wasn't working too bad but I'm pretty sure that once we'd done a few stages the rear shock oil was cooked and they had no real controll over the spring so basicly it was like trying to rally a New York taxi. very bouncy in the rear.

However I did make a mistake where I didn't rev match the downshift to second spot on and compresion locked it slightly and on cold tyres the rear just colapsted and tried to overtake the front. I got it back a bit straight but ran out of road.

It's all repaired and racing again now with only some cosmetics to fix up like a new bar and stuff but for now my zip ties are doing the trick. Kinda drift spec.

First up in the morning the car wasn't working too bad but I'm pretty sure that once we'd done a few stages the rear shock oil was cooked and they had no real controll over the spring so basicly it was like trying to rally a New York taxi. very bouncy in the rear.

However I did make a mistake where I didn't rev match the downshift to second spot on and compresion locked it slightly and on cold tyres the rear just colapsted and tried to overtake the front. I got it back a bit straight but ran out of road.

It's all repaired and racing again now with only some cosmetics to fix up like a new bar and stuff but for now my zip ties are doing the trick. Kinda drift spec.

i thought it looked like you compression locked it a little...

pitty after you caught it you didnt nail the throttle might have just pulled you around the corner, but these things are very hard split second decisions

at least your ok

I really enjoyed watching stage 3

Stage 6 though.....hmm. Not so good to watch.

Hope the next event goes a little smoother for you.

cheers

btw are you running stock brakes!?!

Edited by Duncan1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...