Jump to content
SAU Community

Recommended Posts

he aint been a cop for long, but he's been round the car scene for longer than you've had cooked dinners my friend ;0

you gotta work on your banter a little bit matty, wrong expression me thinks. or just worded poorly. either or.

you gotta work on your banter a little bit matty, wrong expression me thinks. or just worded poorly. either or.

What? No one cooks their dinners? :cool:

I know where Matty's coming from. :banana: Hey Matty, I might know this Ryan cop, wouldn't happen to have a brother named Aaron? PM me and I can give you a last name. Haven't seen these guys in years ... oh the trouble we got into :)

you gotta work on your banter a little bit matty, wrong expression me thinks. or just worded poorly. either or.

brain dead day that day dave

ruby, dont know if he has a brother lol, only met him a couple of times through other mates. most people would probably know the zero traxion dvds..............and where they were filmed (and who was in them LOL).

and rocky, he's registered on here as well, think you were thinking of the username 5LEEPER

finally got my car on the road after 11 months. driven it for 1.5 weeks when i got pulled over on regency rd sat morning. the cop measured the height of the car and said it was 5mm to low and that the wheels were sticking out the guards, After looking around the car and under the bonnet he asked me if i wanted to go to regency. when i replied not really he said that driving the car around like this

is basically driving around with a big flag on top of the car which said defect me. i said i couldn't see the flag just joking with him as he checked my license and then told me to have a nice day and drove off without defecting me. what a tripper, i thought i was off the road for sure.

finally got my car on the road after 11 months. driven it for 1.5 weeks when i got pulled over on regency rd sat morning. the cop measured the height of the car and said it was 5mm to low and that the wheels were sticking out the guards, After looking around the car and under the bonnet he asked me if i wanted to go to regency. when i replied not really he said that driving the car around like this

is basically driving around with a big flag on top of the car which said defect me. i said i couldn't see the flag just joking with him as he checked my license and then told me to have a nice day and drove off without defecting me. what a tripper, i thought i was off the road for sure.

Very, very lucky! If you get a chance mate, call me tomorrow to discuss the motor, I'm very interested

brain dead day that day dave

ruby, dont know if he has a brother lol, only met him a couple of times through other mates. most people would probably know the zero traxion dvds..............and where they were filmed (and who was in them LOL).

and rocky, he's registered on here as well, think you were thinking of the username 5LEEPER

yeh u can get his last name off pretty much any zero traxion clip, i wont post it up here as its not my place, but a quick search will reveal it if need be. also a bloke on here who's in the force, not sure if he's a full cop or not, but he's moved on to ford and sold his 33 as apparently they have no issues defecting the newbies cars when they come lol

finally got my car on the road after 11 months. driven it for 1.5 weeks when i got pulled over on regency rd sat morning. the cop measured the height of the car and said it was 5mm to low and that the wheels were sticking out the guards, After looking around the car and under the bonnet he asked me if i wanted to go to regency. when i replied not really he said that driving the car around like this

is basically driving around with a big flag on top of the car which said defect me. i said i couldn't see the flag just joking with him as he checked my license and then told me to have a nice day and drove off without defecting me. what a tripper, i thought i was off the road for sure.

:D:):ninja::)

finally got my car on the road after 11 months. driven it for 1.5 weeks when i got pulled over on regency rd sat morning. the cop measured the height of the car and said it was 5mm to low and that the wheels were sticking out the guards, After looking around the car and under the bonnet he asked me if i wanted to go to regency. when i replied not really he said that driving the car around like this

is basically driving around with a big flag on top of the car which said defect me. i said i couldn't see the flag just joking with him as he checked my license and then told me to have a nice day and drove off without defecting me. what a tripper, i thought i was off the road for sure.

Kudos to the cop....sounds like he was a nice chap....but to be honest mate you were so damn lucky....now go and buy a lottery ticket and really put that flag on the car

Not defected but Im taking a 32 with a 25det in it through regency as it is from Victoria, with the brake upgrade will 33 slotted rotors and callipers on the front be enough? Or do I need to replace the rear brakes as well? and if so how much should I expect to pay for the callipers, I will be buying the rotors separately brand new.

Cheers.

Not defected but Im taking a 32 with a 25det in it through regency as it is from Victoria, with the brake upgrade will 33 slotted rotors and callipers on the front be enough? Or do I need to replace the rear brakes as well? and if so how much should I expect to pay for the callipers, I will be buying the rotors separately brand new.

Cheers.

you should be fine with just the front brakes dude. afaik theres no difference with the rears.

Ok well here's the whole deal I am buying this car from VIC on Sunday and it is not engineered or registered with the RB25. http://www.skylinesaustralia.com/forums/Eo...ts-t285533.html

Now he is supplying me with 4 stock rims, afm and stock cooler + piping. I can get a stock ECU, entire intake with injectors, fuel rail and fuel pressure regulator off a mate. I can easily remove the catch can, turbo timer and replace any bushes, the suspension is non adjustable and is above 100mm in ALL places. I can also get an EPA test done that will pass and the exhaust is apparently very quiet, also the pod is mounted to the chassis.

Now I know I am going to have to replace the intake and fuelling accessories, the ECU, put the stock AFM back, remove the vented catch can and turbo timer but can I get away the front mount and the suspension? Is it even possible to pass with the ECU providing it passes the EPA test with it installed? It is plug and play so no fuss replacing it but would make it easier if I could leave the ecu + the fueling system in place as this will be the biggest pain in the ass.

Oh also the engine numbers will obviously not match up as the car is still registered with the RB20, providing they check that the car has the R33 turbo brakes and it passes the inspection will they give me authorisation to get it registered?

Anyway thanks guys, wish me luck. I've got 2 months of rego left on it so I will just drive it around on VIC plates until I get all these things sorted.

:banana:

Edited by Rolls
If the car is stock is there anything else I need to do to the car to make it pass?

im half way doin the rb25 to my 32 and i was under the inpression u have to get a emisssions test? just to make sure the stock ecu is there and un modified. thats what i was told and told, and it dosent matter about the rear r32 brakes being almost the same as the r33 brakes, u must have the r33 brakes or the same year or above brakes when doing the engine conversion. This has been what i was told by my mechanic. and it might pay to make sure the slotted rotors are ADR approved. i dont think all of them are. good luck with it though, i gotta take mine through soon :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...