Jump to content
SAU Community

Recommended Posts

When you have called them Krish about that give us a call so I know what's happening. As soon as I got out the car he said it's getting defected and towed.

Then that demonstrates prejudice... He's already decided the car in question was defectable without having inspected it. Quota system. I would like to say that a competent lawyer would be able to get it overturned upon this basis, but the fact that there was a defectable unit involved means that the cops have been vindicated.

You *could try* and remove that turbo and return it to stock, remove the EBC and argue the fact that the officer in question pointed to the master cylinder. A lawyer could subpoena said officer and ask him to point out the BOV/EBC whatever and if he does it to a stock piece of equipment, case closed - however, the likelihood of this happening is very remote, a) the police prosecutor is wise on such things and advises officers about how to act in court (same way a lawyer advises civilians basically). and b) its really really expensive to hire a lawyer and correct injustice. Cheaper to cop it on the chin, get the car engineered, reverted, whatever... I had a good chat with my cousins husband on Sun about this, he's a police negotiator who doesn't deal much with traffic offences, but knows the relevant law.

Interestingly, he works up near the north border of our state, in a community with 99% aboriginals. They don't defect cars up there. Period.

They do enforce licences, but as far as registration and roadworthiness, FORGET IT! They have enough problems with violence to provoke the indigens with 'trivial white man law'. Funny to think that we get defected for having an EBC and yet the natives can drive around the country with bald tyres, no registration, seatbelts, windshields etc without the law caring. Just saying.

-D

Edit - Agree with heslos comment about shit happening, but I have to disagree with the cop comment (not because of the cop I spoke to yesterday mind..) In my personal experience, I have been pulled over twice in the last 4.5 years of driving, never defected, only breathod and rego checked. And both times they have been nice. Maybe its cause they see my ID or not, or maybe its cause I'm a nice guy. Either way, as much as I fret about getting pulled over and reamed for something trivial, I've been lucky and I can't really dis SAPOL for checking my licence and rego and bretho.

NO - Ive never done a "skid" before.

Never, not once since I got my L's on my 16th birthday 18years ago.

My poison was "going fast" back when I used to ride bikes, so I know Ive done wrong previously, however that being said, I dont go over the limit simply because I couldnt afford to pay out a speeding fine! That, and with the fear of defect, my Stagea is for sale.

I have to agree with Tangles here.

I've never done 'a skid' - I've been stupid on the roads before, got caught, done the penalty and copped it sweet (drink driving, dangerous - 11 yrs ago) but since I got the GTR I've never dared risk it cause I need my licence and any criminal charges would really screw my career. You can't assume that everyone with a high powered car is a dickhead. I'm 32 now, I did my dumb shit when I was 21 and learnt from it. And I avoid going over the limit for the same reasons as Tangles.

I'll never sell the GTR. If it does get defected for something minor, I'll fix it. If its for something major, I'll engineer it or remove the defectable item. I've driven my car >as a daily< and not had a fraction of the problems some lads have had.

That said, Krishy's car is pretty hardcore. Its impressive to watch and I guess thats what the po-po radar picked up on and decided 'oh that needs to be taken out'... I'm not saying its right (far from it) but eh, the cynic in me is not surprised.

I just hope u keep ur car Krishy... its a good one...

-D

Yeah I will be looking into what needs to be done to have things engineered. For eg. Turbo etc

Need a full spectrum emissions test, called the IM240, you will need low boost, a fantastic CAT convertor, O2 sensor working and all the O2 feedback working, and the tune to be perfect, too rich and you fail on carbon monoxide, too lean and you fail on nitrogen compounds.

You will want a competent tuner with a gas analysis machine to get it fairly right and then come along and tweak what needs to be tweaked when you fail the first time. It is around $1k a pop when you go so you want to get it right.

Need brakes upgraded and they will probably want to do a lane change test and a few other things. Adds up very fast.

Edited by Rolls

Yeah I will be looking into what needs to be done to have things engineered. For eg. Turbo etc

Dont bother. Just take it back to stock, put it through then put all the shit back on again. Its the easier and cheapest way

Krishy - so just how modified *is* your car?

It wouldn't be a bad idea to get a list of stuff, to figure out what's legal, what can be cheaply engineered, and what would be needed to be reverted to stock.

That said, apparently SA police do trawl these forums. Maybe we need a 'defect' section in the members only area.

Suspension components would be handy to have engineered, coilovers/arms....anything adjustable etc.

You can't engineer a lot of that stuff as adjustable arms are rose jointed etc, simply can't be done.

Same with adjustable coilovers, need a perch welded so that it can't be lowered to an illegal height.

You can't engineer a lot of that stuff as adjustable arms are rose jointed etc, simply can't be done.

Same with adjustable coilovers, need a perch welded so that it can't be lowered to an illegal height.

well thats just ghey! lol ah the law is the law i guess

well thats just ghey! lol ah the law is the law i guess

They do it for a reason

Interesting discussion on rose joints here

http://www.performanceforums.com/forums/showthread.php?67181182-quot-Rose-quot-joints-a-curly-question

Edited by Rolls

have seen coilovers engineered and accepted by regency on two sepeate cars without having the adjustability fixed

It doesn't have to be fixed, you just can't be able to lower it below legal height, it can be adjustable above the minimum height.

If they let it through it doesn't mean it is a precedent either, they might have just not cared that day.

i was more referring to the adjustablility factor, ie adjustable tension rods etc. since our cars cant really be properly aligned without kits

You can have adjustable kits, you just typically can't have rose joints, unless the manufacturer provides a list of all materials used and you have them crack tested, then you could get an engineer to argue they are just as strong if not stronger than a standard bushing set up.

You can have adjustable kits, you just typically can't have rose joints, unless the manufacturer provides a list of all materials used and you have them crack tested, then you could get an engineer to argue they are just as strong if not stronger than a standard bushing set up.

makes sense i guess, although most adjustable kits are rose jointed which sucks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...