Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
The Caltex and BP on the Princes Hwy at Tempe are always the lowest ive seen.

Caltex was 91.5c for E10

BP was $1.08 for Ultimate

It was 89.9 @ Narrabeen SHELL 2nite...

But that was with a docket...

Filled up with V-Power @ 108.9c

why the hell is newcastle's lowest price we are seeing is 98.9 for normal unleaded but i am cheering about the price drop it used to cost me $90 a week to get 330km out of my fairmont 5L now i am filling up in the skyline for $45 score

Shell is ripping us off 3c a litre (50L x 3c= $1.50 = half a can of red bull... 2 fill ups later we can afford a can) LOL pulp 98 is meant to only be 10c higher than regular ulp shell Is 13c more and bp is like sometimes 16c and higher more so go caltex or mobil to rebel (you see I used to work in the industry and anyway caltex sells pulp to everyone except mobil which makes it's own so it doesn't make a difference except to our pockets), where's everyone getting boost 98 from??? I've seen good dyno runs on that

Edited by DaGr81

^^^ Exactly. Still feels like we are getting ripped, just in a different way. Anyone know why the difference became 13c at all pumps(one's I've been to anyway) Caltex, BP and Shell all started doing this once the prices started heading down. What would be the justification?

Not sure myself but just some caltex is ripping us , mobil ftw! Bp seems to always have been doing this though, although they use the same barrel of crude oil to produce 92, 96 and 98 funny isn't it.... Should we complain to the consumer watch dog? As a group ?? I want that red bull dammit

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...