Jump to content
SAU Community

Recommended Posts

fullee sick 20s bro

unless your planning on entering your car into a show (which you very well might be) don't even consider driving around with them on the street.

i'v never understood why you would compromise handling and grip in a sports car for cheap lebo looks.

my mate had 20" vault cyrstals on his R33 gts-t

not only did it look shiit the ride quality was completely fkd.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

yes the new GTR comes with 20s. but the gts-t originally came with 16s

i wonder how 24's would go on the new GTR. my guess is not so good.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Those wheels are not chrome bling though.

If anyone noticed alot of cars including the GTR now comes with 20" rims

For looks. The car is so huge that small rims look disproportional.

Several race cars run big 20" on the front to increase handling.

I'm curious to see which race cars do. And I'm not sure how increasing unsprung weight and rotational inertia provides an increase in handling.

Going to big rims has little to do with improving handling, especially not a 4" increase over stock. On a race car you go for the smallest wheels you can fit around your brakes. Sometimes that necessitates putting on bigger rims than stock.

At any rate, the suspension is engineered around the wheel/tyre combo. What's the likelihood that this guy's R32 has its geometry and components engineered around 20's? Or that it will only get driven on smooth surfaces where the loss of sidewall compliance and increase in unsprung weight is not going to more than offset the supposed benefits of reduced sidewall flex?

hey guys i am just wondering if any1 knows whether or not 20" rims will fit a stock r32 gtst (the offsets and width and bolt patten are all proper) or if i will have to raise the car to fit these.

Thanks

as mentioned in the original post the car is stock.

the cars "geometry" has been set up to handle the stock 16" wheels that were issued from the Nissan factory floor.

so 20s will not do at all for this setup.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Ahahahahahahahaha

hahahah

hahahahahaha

hahahahahahaha

haha

hah

ha

Buses come with huge tyres and rims - so by that principle bus wheels should work out OK on the 32 as well.

GOLD.

:)

can you see the rims when your driving?? i cant on my r32 so my guess is no... therefore looks mean nothing, purpose means everything. buy your 20" rims and stick em on your wall, use them for a glass coffee table or tv stand where you can see em.

for the record buses are not 5 stud lol best come back i got.

TO ANSWER THE QUESTION:

Yes they will fit .. you would need a cheese cutter wheel something like 20x8 with an offset to fit .. coilovers would do wonders too ..

Edited by DECIM8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...