Jump to content
SAU Community

Recommended Posts

fullee sick 20s bro

unless your planning on entering your car into a show (which you very well might be) don't even consider driving around with them on the street.

i'v never understood why you would compromise handling and grip in a sports car for cheap lebo looks.

my mate had 20" vault cyrstals on his R33 gts-t

not only did it look shiit the ride quality was completely fkd.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

yes the new GTR comes with 20s. but the gts-t originally came with 16s

i wonder how 24's would go on the new GTR. my guess is not so good.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Those wheels are not chrome bling though.

If anyone noticed alot of cars including the GTR now comes with 20" rims

For looks. The car is so huge that small rims look disproportional.

Several race cars run big 20" on the front to increase handling.

I'm curious to see which race cars do. And I'm not sure how increasing unsprung weight and rotational inertia provides an increase in handling.

Going to big rims has little to do with improving handling, especially not a 4" increase over stock. On a race car you go for the smallest wheels you can fit around your brakes. Sometimes that necessitates putting on bigger rims than stock.

At any rate, the suspension is engineered around the wheel/tyre combo. What's the likelihood that this guy's R32 has its geometry and components engineered around 20's? Or that it will only get driven on smooth surfaces where the loss of sidewall compliance and increase in unsprung weight is not going to more than offset the supposed benefits of reduced sidewall flex?

hey guys i am just wondering if any1 knows whether or not 20" rims will fit a stock r32 gtst (the offsets and width and bolt patten are all proper) or if i will have to raise the car to fit these.

Thanks

as mentioned in the original post the car is stock.

the cars "geometry" has been set up to handle the stock 16" wheels that were issued from the Nissan factory floor.

so 20s will not do at all for this setup.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Ahahahahahahahaha

hahahah

hahahahahaha

hahahahahahaha

haha

hah

ha

Buses come with huge tyres and rims - so by that principle bus wheels should work out OK on the 32 as well.

GOLD.

:)

can you see the rims when your driving?? i cant on my r32 so my guess is no... therefore looks mean nothing, purpose means everything. buy your 20" rims and stick em on your wall, use them for a glass coffee table or tv stand where you can see em.

for the record buses are not 5 stud lol best come back i got.

TO ANSWER THE QUESTION:

Yes they will fit .. you would need a cheese cutter wheel something like 20x8 with an offset to fit .. coilovers would do wonders too ..

Edited by DECIM8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...