Jump to content
SAU Community

Recommended Posts

Im under the impression that carbon fibre bonnets are way to strong and are not subjected to crash testing like the standard bonnet therefore would just penetrate into the cabin and cut your head off.

Not sure about fibreglass coated with carbon which will crumple but is very sharp and jagged when you break it e.g a fishing rod.

Wings can be illegal too because they can be a risk to pedestrians. Alot of people i know got defective VN for T-wings and had to remove them.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4324054
Share on other sites

If carbon bonnets cut your head off there wouldn't be a single manufacturer on the planet that would create cars with carbon bonnets. Seeing as cars from factory tuning shops can come with carbon bonnets I don't think that would be an issue.

Having said that, I'd lead to believe that carbon bonnets shatter into many shards upon impact which can be a health hazard to pedestrians and other road users as well as the occupants of the car.

I've had a carbon bonnet (fibreglass core though) for a year now and have driven past many a cop car and been through several booze bus set ups and not a sinle cop said anything. Does that mean its not defectable? Probably not. I think it means if you drive sensibly and your car isn't over the top the average cop won't give you any headaches.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4324241
Share on other sites

if it hasn't been crash tested for occupant/pedestrian safety as part of a New Australian vehicle, then it's defectible.

Come on guys, It's not that hard to figure that out.

here's a good place to start with our Vic rules:

Vicroads standards

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4324280
Share on other sites

What Ronin says is right, if it hasn't been ADR approved it's illegal. Even though non-standard stuff may be just as safe, safer, or better than stock the fact that it hasn't gone through all the tests means it cannot be placed on your car.

It's the reason some cars aren't imported into here (or at excessive cost) because manufacturers can't justify the high cost of compliance for a high volume import.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4324323
Share on other sites

im located in NSW

as you can see in my profile if it shows thats the car, im not to sure exactly what type it is and stuff and i was thinking of maybe still getting engineers certificate for them both just to be safe but yeah im not sure.

yes, clearly the link I posted is for Vicroads.

How about you use a search engine such as "google" and find RTA for their regs?

If you can drive a computer to find SAU, you can find *and read* the RTA rules and regulations yourself.

sorry if that sounds harsh, but so many people come to SAU and ask questions that can be researched independently on the internet (in terms of legislation, rules and regs) and get hearsay and rumour based answers such as "my cousin's mate got done by some piggaz for his coolerz and carbon so itz illegalz".

Get the info directly from the source.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4325127
Share on other sites

I wish I had cf bonnet its like glass so yeah it would shatter if you crash, so I think to be safe I will stick to my normal bonnet lol.

But if it ever does become legal or if they bring out a safer option ill definately be thinking about getting one for my 32.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4325249
Share on other sites

on the other hand, you might try putting in a vspec II nur bonnet...aren't they CF? Seems like that may be legal as it is allowed on Nur's.

of course noone will probably know it is CF because it is painted except for the NACA duct.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4325300
Share on other sites

^^LOL!

If you know your GTR V-Spec II's, N1's and Nur's, they all came with stock Carbon Fibre bonnets with the NACA duct.

When ppl know that, they will know you gota Carbon Fibre bonnet.

So yeah thats an option.

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4325584
Share on other sites

so many people come to SAU and ask questions that can be researched independently on the internet (in terms of legislation, rules and regs) and get hearsay and rumour based answers such as "my cousin's mate got done by some piggaz for his coolerz and carbon so itz illegalz".

Get the info directly from the source.

Gold star for you Marcus :D

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4325605
Share on other sites

Im under the impression that carbon fibre bonnets are way to strong and are not subjected to crash testing like the standard bonnet therefore would just penetrate into the cabin and cut your head off.

Not sure about fibreglass coated with carbon which will crumple but is very sharp and jagged when you break it e.g a fishing rod.

Wings can be illegal too because they can be a risk to pedestrians. Alot of people i know got defective VN for T-wings and had to remove them.

lol! mate your car has a CF bonnet from factory! So they must be subject to testing and be passed originally.. at least in Japan!

Link to comment
https://www.sau.com.au/forums/topic/249330-carbon-fibre/#findComment-4326559
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...