Jump to content
SAU Community

Recommended Posts

Here are the road safety regulation requirements for licence plates...

Must not obscure the number plate in any way, ii. Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured.

Pretty sure they are uniform across all states.

pfft I've got one of those license plate covers with the black lines across it.

Driven past plenty of patrol cars and even had a patrol car tail me out of curiosity, and haven't had any problems

one of many rules in place that aren't really enforced I guess, there's all these p platers around my street with sh$tbox cars and cannon mufflers and they seem to get away with them even though they can't do modifications

Here are the road safety regulation requirements for licence plates...

Must not obscure the number plate in any way, ii. Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured.

Pretty sure they are uniform across all states.

So this confirms i'm correct by saying this car is now deemed as a possible defect????

whoop de doo

there are people starving in this world and your worried about a numberplate cover?

you really wasted our time replying to this with that reply???? There are people starving and your making random smart ass comments???

lol jkz

You also dobbed yourself in for using your phone/camera while driving.

I was parked and the keys weren't in the ignition :blush:

pfft I've got one of those license plate covers with the black lines across it.

Driven past plenty of patrol cars and even had a patrol car tail me out of curiosity, and haven't had any problems

one of many rules in place that aren't really enforced I guess, there's all these p platers around my street with sh$tbox cars and cannon mufflers and they seem to get away with them even though they can't do modifications

That doesn't mean they wont get defected, just that they are running the risk of being defected, and their are people who get done for number plate covers.... even on these forums ive found them.... but i'm 100% sure that this rta car will never get defected for it where as if you get a smart ass highway patrol car you still have the possibility of getting done.

Ok firstly:

How do you know its an actual RTA company car? Maybe its just someone that really likes the RTA? Or has the initials RTA?

And secondly are you sure its not just a number plate frame? not a cover?

Ok firstly:

How do you know its an actual RTA company car? Maybe its just someone that really likes the RTA? Or has the initials RTA?

And secondly are you sure its not just a number plate frame? not a cover?

its even got the lines going across the numberplate in the dodgey photo....

and RTA will not let anyone choose a numberplate starting as RTA, especially RTA.002

there are RTA cars from RTA.000 - RTA.999

also its a WHITE toyota Aurion = company car lol

So this confirms i'm correct by saying this car is now deemed as a possible defect????

Well no if you'll take the time to absorb what was written, it appears the licence plate cover you have pointed out falls within the legal guidelines ie: NOT illegal.

Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured

Looks flat and clear, no distortion and I can't see any lines on it.

You were able to take a clear picture of it weren't you? So...

Well no if you'll take the time to absorb what was written, it appears the licence plate cover you have pointed out falls within the legal guidelines ie: NOT illegal.

Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured

Looks flat and clear, no distortion and I can't see any lines on it.

You were able to take a clear picture of it weren't you? So...

Doesn't matter if I could take a clear photograph of the number plate or not, it is against their own regulations. I did read what was posted and it clearly says its "...effectively Prohibited." Open the photo again, use the zoom function and you can see lines across the cover. The RTA doesn't state that lines are acceptable if under a certain width. All in all there's 8 black painted lines across the numberplate that I can still make out even though the quality of the camera phone picture isn't very good. Imagine how much more obvious the lines are in person to grab my attention like that?

I still can't see why everyone jumps to defend the RTA when they make up allot of pointless (also allot of good) rules that ultimately cost us money in fines, even unintentional non dangerous defects.

A regulation is a regulation and I don't care who breaches it, no matter how small the infringement is. They say rules are there for a reason, are they not? Not all the rules are there for safety. A friend of mine got fined for having her Registration sticker on the tinted section of her front windshield, is this dangerous? Is she a hoon? No! but the regulation for sticking the sticker says it cannot be behind any tint, it has to be on naked glass on the windscreen or the left hand side of a fixed glass window. If she can get done for that, this Car should not have black lines across the numberplate.

19" mon @ 1280x1024 zoomed, unzoomed and over zoomed.

Could be your shit camera resolution but I still see NO lines.

But hey if you say they're there thats good enough.

Lol

Edited by madbung

It's def RTA. they have reserved all RTA and RTB plates.

I can read the plate... you could ready the plate... whats the problem? Sure if one of the letters was obscured it might be an issue.

I think you're touch the tip of a much larger ice berd. QUICK call ACA with your hot scoop!

It's def RTA. they have reserved all RTA and RTB plates.

I can read the plate... you could ready the plate... whats the problem? Sure if one of the letters was obscured it might be an issue.

I think you're touch the tip of a much larger ice berd. QUICK call ACA with your hot scoop!

Yet if the police officer didn't like the RTA driver, he would defect the car for an obscured license plate...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...