Jump to content
SAU Community

Recommended Posts

Well for the past month-ish in the early hours of the morning (usually around 2-3AM) a white or cream van with a front bullbar has been driving past my house, chucking a u-turn at the intersection, coming back past the way he came, then going around the block and going down the road where he chucked the u-turn. I haven't been taking exact notes of what nights it happens, seems to be when I've just gone to bed at that time, so friday/saturday nights but has also been happening during the week.

The odd thing is, he takes the exact same route every time. Comes from the same end, chucks the U-turn, and a minute later comes down the where in which he turned around in.

What got my attention to this car was what I think is a backfire. At first I thought it was an egg hitting my car but no signs of eggs. The sound seems to happen at the same spot, so I'm guessing its something to do with the rev range, therefore backfire.

Its slightly scary as although my car has an alarm, I have a very big scary mean old Dad sleeping right next to the front door, and I have a clear view of my car from my bedroom, I still feel my car is under threat. Its as if he's planning an escape route or something.

My question is what should I be doing about this? He's obviously up to something, and it may not even have anything to do with me or my car, but I don't want to forget about it then see my car get vandalised/stolen one night. Its too dark (although I do have a street light outside) for my phone camera or even video camera on night mode to catch any good images, so I can't try any of that.

I have some time to get outside once I first hear the car, as he will turn around to come back, then lap the block and drive down the adgacent street where I can easilily intercept him.

I was thinking about running into my car and following him, but then what? If it is anything to do with my car, all that will do is provoke him. I was also considering a stake-out with a mate but even then, what do I do when he does drive past? Sit back at watch him for the whole 20 seconds for the night?

I'm confused as to why he's doing this and what action I should be taking, or if I should even be worried. Just seeking advice on what you would do in this situation? I don't think the police would care as what more can they do.

Thanks for any tips, Tom.

Oh and if you're on here or anyone knows who I'm talking about, just leave me alone! I've worked way too hard to afford my car and have already had my share of jealous people.

Link to comment
https://www.sau.com.au/forums/topic/249677-mysterious-van-nightly-drive-bys/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Maybe the man/van is delivering something...papers, milk or something

If it worries you that much maybe get his details and report it. Or go out there and wait for the van and egg it:)

Same happens on my street on a regular occasion in the wee hours of the morning. Went out one morning and took a closer look, noticed that the van had a lcd monitor near the driver and and eventually picked out an advertiser logo inside the van. Figured that he works for the advertiser or another newspaper. Not sure what he's doing but hes around regularly and although acts suspiciously nothings happened in the year i've been seeing him so im not fussed.

Maybe take his plates if your worried

simple, next time you hear the van - race outside with BIG iron bar whacking your own hand, and stand by your car.

narkers of course

do this three or four times and he wont go near you !!!

hahaha ummm we'll see how we go Tangles.

WhO, I just had a thought, maybe he is delivering papers and thats the noise I'm hearing, pretty fast for paper delivery though.

If this new theory falls through and I do get more worried, I will try to get his plates just incase. The paper delivery idea puts my mind at ease a bit more.

Yeh its the paper man, comes past my house too, drives like an absolute nut... I've almost been taken out by him one time when he cut the whole T intersection as i was approaching it, lucky he swerved quick enough.

But yeh I don't really think you have much to worry about unless you're driving near him lol.

post-31501-1229824247_thumb.jpg

was this the van? they could have been out late night trying to solve another mystery

sounds like its the paper dude man if you get a approx time just go out hide in the bushes n watch for like 5 min bound to get a look whats going on :laugh: itll be like a cool cop stake out

lol as I was reading I automatically guess it was the paper guy - he goes down my street at a descent speed while still manages to get the paper into the front yard fine! I hear something like zoooooooooooooo*THUD*ooooooooom

hahaha. this thread is great. atleast u havent come home to a house you have been living in for no more than 2 weeks to find that the manhole is open for no reason. nothing missing from the house at all.( and yes it was shut originally). now that keeps you awake at night.

Hide in the bushes with a trench coat on, nothing else.

when he drives by jump out!!! flashing him with a sock puppet that looks like a dog on your johnson? and bark like a dog !!!!that would scare away anyone..lol scared me just writing it..lol

I feel for you, I scared away someone? over the razor sharp steel fence a week ago (for the second time now) lurking in the darkness after they woke up the flock of birds nesting in the tree near my window, Galah's !!!, best watch dogs on the planet to bad they don't chase them down and chew out there eyes . and if its someone reading this forum your in for serious public stoning by the SAU crew next time...lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...