Jump to content
SAU Community

Recommended Posts

Hey,

i have a r32 gtr with a r33 rb26 thats fully worked that was rebuilt no more then 20 thousand ks ago.

i was driving it home 2 days ago and just as i drove in my drive way it started making a ticking/knocking noise.

does this sound like a spun bearing??

if so what could have caused this so soon after a rebuild? i got it compression tested 2 weeks ago and came back perfect then this happens??

my race bred sounds like a tractor...

http://au.youtube.com/watch?v=Nwp-Cl0Pq3o

Hey,

i have a r32 gtr with a r33 rb26 thats fully worked that was rebuilt no more then 20 thousand ks ago.

i was driving it home 2 days ago and just as i drove in my drive way it started making a ticking/knocking noise.

does this sound like a spun bearing??

if so what could have caused this so soon after a rebuild? i got it compression tested 2 weeks ago and came back perfect then this happens??

my race bred sounds like a tractor...

http://au.youtube.com/watch?v=Nwp-Cl0Pq3o

So.....who built it? What is done to it? Possibilities of failure are semi endless, incorrect assembly, incorrect clearances, losing oil pressure etc. Need to pull it down to have a look.

when u take the engine out, take off the head and throw the entire bottom end straight into the tip because pretty much none of it will be salvagable with that load a knocking

Sounds horribly like a spun bearing alright. Had one myself not long ago. I'm happy to come and have a listen close up just to confirm it if you like, I'm in coorparoo, but don't drive the thing over. Don't drive it at all. Send me a PM and I'll be happy to come and have a look.

Andrew

Did you follow the run in procedure set by the mechanic?

Run in?

meh, bed it on the dyno, tune it up. If its put together right thats all it should need

Either way, its beyond dead. crank and everything no doubt to the recycling mill :P

and ye, endless possibilities as to what could have killed it. The list is long

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...