Jump to content
SAU Community

Recommended Posts

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Got my kit today! Looks all good, i have no idea how to install though :'(. Any guides around here? I looked at the instructions and i'm like "yeah... but... how do i get my lights out? which light do i take out since isn't there two?".

Okay i've looked at my lights again. All i know is that i have to spin off that black thing, pull out the lights and then thats as far as i get. I don't know what to do next. Could someone please just simply tell me what i need to do? I only need to know what needs to be taken off, i should be able to figure out what goes on then lol. Theres some white thing in my car i'm assuming i have to pull off too, but i don't know how to get that off.

Disconnect the negative terminal on you battery.

Pull dust covers off.

Pull the wires out of the dust cover (you will need a dremel to cut the hole bigger so you can get the wires out)

Then cut a 50c piece out of the dust cover. This is for the HID bulb wires to go through. And dont worry there is a gromet attached to the wires that will plug up the bigger hole.

Carefully put the HID bulb in without touching the bulb,

Hook the metal clip back over the HID bulb, will be a little harder than before but it will hook on.

Take the negative wire off the headlight housing and plug it into the black wire on the HID ballast

Take the red wire you had plugged into your old halogen plug and plug that into the red HID ballast wire.

Feed the HID bulb wires through the dust cap and plug them into the ballast.

You will see onthe side of the ballast a - and + make sure when you make the ballast connection the red wire in on the + side and the black on the - side.

There the kit is connected, put the dust cover back on and afix the ballast somwhere safe in your engine bay.

Put neg lead back on the battery and turn you headlights on.

I normally leave them on for about 10mins after i first start them.

Here is a phone pic of the completed install, sorry for the quality of the pic.

post-32255-1232024783_thumb.jpg

Hope that helps.

I did it a little differently. I pulled the power wires out of the grommet so I only had the bulb and it's wires going into the housing, all other wires are on the outside. Keeps it pretty tidy...

img00299200901132305519mm0.jpg

img00298200901132305515vf1.jpg

Okay, i think i kind've get it now... lol. Why do i have to take the negative lead off my battery though?

Because you might get a big shock or you could fry your ECU if you do something wrong.

And considering you did not know your headlight bulb to your highbeam.....need i say more.

Because you might get a big shock or you could fry your ECU if you do something wrong.

And considering you did not know your headlight bulb to your highbeam.....need i say more.

Lol, i figured out which one was my high beam and which was my headlights shortly after i posted that question. I was like "oh yeah, i can just turn on my headlights and then high beam to see which ones they are".

But i'll admit i know basicly nothing about this type of stuff. Its my first car and i've basicly never touched a car before i got my skyline hahah.

Hi mate,

In your other thread you were arguing that you do not make any profit on this and you buy from local distributor when clearly i mentioned you that BOSCH HID kits can be bought brand new for $150 and yes i imported few for myself. As per the forum rules, since you're not a trader can you please update your first post and tell us who is the local distributor for warranty issues. If it's you who is providing warranty, then clearly you're trader and should support SAU by becoming registered business.

I dont what you are trying to achieve here mate.

The only reason you get these kits cheaper is because import them yourself. Im buying them locally from a business here in Syndey.

Im buying the from SDC Performance in Sydney.

www.sdcperformance.com.au

All warranty claims are first mentioned to me then i pass it on to them.

That's all i wanted to know. Not trying to achieve anything but there are forum rules that everyone of us should follow. And you not doing anything wrong by selling their kits but just let people know who the distributor is.. nothing wrong in asking that publicly.

Good luck. BTW BOSCH hid kits are one of the best kits in the market i must say.

Ok my lights are in and working!!! Can't wait to see how they look at night.

One question, there was blue plastic stuff on the back off my metal thing. I just left it on there, but should i have peeled it off? I didn't know what it was so i just left it lol.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...