Jump to content
SAU Community

Recommended Posts

Hey all.

So I've got a completely stock r33 s2, and want to build it up as a bit of a sleeper. Really stock looking on the outside, but with a bit of a punch under the bonnet. Nothing too crazy, maybe would like to push up to 200kw over time.

The aim of the game is to have the car 100% legal, or as legal as is humanly possible. I got a Just Jap return pipe intercooler put on which uses the standard intercooler pipes and did not require the cutting of the body etc. First mod= legal. A dyno run after the installation revealed that the car has 145kw at the wheels.

The other day I chuck a high flow k&n panel filter in the standard air box. Noticibly smoother accelleration etc. Second mod= Legal.

Now it comes time for the exhaust. The car needs to be under the legal db limit.

I bought a second hand 3 inch dump pipe from the forums, ready to bolt on.

I also bought a second hand 3 inch cat back exhaust, minus the end muffler. The system is designed to bolt up to the cat and can accomodate an aftermarket muffler, and has a flange, so that the standard muffler can be bolted on as well (for when the EPA bites you in teh ass presumably. The idea is to not get to this point however). Both of these parts appear to be mild steel, not stainless.

So now, to recap, I need a 3 inch high flow cat and an end muffler to complete the system. (If anyone is selling any of these items btw, let me know)

My question is. What sort of muffler should I have put on that will flow well, yet ensure that the system falls within the legal db limit? Please also keep in mind that I would like the muffler to look as stock as possible- I guess that rules out cannons etc.

Does anyone have any suggestions? Also, does anyone have any idea how much of an increase in power this should net me? Any tips etc, let me hear them as I am relatively new to the scene and am keen to learn.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/250355-building-my-exhaust/
Share on other sites

Going 3" straight through you will be pushing it for legal db's!

Your best shot would be to talk to a good exhaust shop (some have a db meter handy), but i would recomend fitting a resinator of some sort

^^ you couldn't be more wrong. Easy to get a 3" legal. I have a 3.5" - 92dB, ended up with under 90.

And resonators do not work, so another piece of bad advice in afraid.

You need two decent sized mufflers. Simple as that.

A panel filter isn't illegal. You're using the stock airbox, that's all that matters.

So you cant use a pod filter in Australia? thats gotta suck

Australia's laws are so tight ass compared to New Zealand, I have to hand it to our 3rd world approach to things, lets me gets away with a straight through exhaust and ground clearance that turns me into a grader on any gravel road.

So you cant use a pod filter in Australia? thats gotta suck

Australia's laws are so tight ass compared to New Zealand, I have to hand it to our 3rd world approach to things, lets me gets away with a straight through exhaust and ground clearance that turns me into a grader on any gravel road.

Our exhaust law still states that it has to be under 95db :blush:

oh i see

damn aye

in regards to the exhaust but i have a 3 inch turbo back with high flow cat and rear resonator + cannon and atm mines losing boost pressure up higher in the revs so im only pulling 170 on the dyno instead of about 200 which my tuner reakons i should be seeing

so yeh I'll have to see if its the exhaust doing this but i suspect its the problem

boost is on the intake side, you cannot loose boost from an exhaust, as boost does not exist on the exhaust side

I think the poster about losing boost wasn't referring to losing it out the exhaust, more so eluding to the fact the exhaust might be a large restriction causing a drop in flow, causing a loss of boost.

As to a legal exhaust:

You will want a 3" exhaust, with a 3" high flow cat, a 5" bodied mid muffler, with some decent length, and then you will want as large of a rear muffler as you can fit.

I would also say to put the twin tips on the exhaust, and have them painted black.

I run a 5" mid, and a 7" end muffler (Cannon style) except they're not stainless, and not all shiney, and the whole exhaust, when looking at it from the back any more then 2 metres away, and it looks invisible, matched with a nice and quiet exhaust note, no issues there with the plod.

My mufflers are also 650 and 550mm long respectively. You want LENGTH AND DIAMETER for a good muffler. And yes, mine are both straight through and are custom built.

i had a 3inch exhuast on my 33 s2 with a hot dog as the centre muffler (needed the ground clearance)

and a full size muffler out the back and the db meter hit 89.5 on back off (wich is ur loudest figure)

and was given a certificate to state that the exhuast was legal in every way

just one thing to know....your front mount is not 'legal' in the true sense of the term...its only legal if you pass a free emisions test at the RTA in botany or penrith...

SORRY but my comments are for NSW...

Orig poster = Vic

Vic = the laws being discussed/applied here.

Can people from other states please refrain from posting about legalities if they do not know Victorian law?

All it does is confuse the issue for people reading at present, and then later on if they search and find this thread.

R31, It'd be handy if we actually knew the person was from vic.

Nothing in the post states location, and the only way we can assume he's in Vic, is being a Vic club member, and hey, they could have moved or anything since becoming a member.

Maybe get the board admin to show everyones state at least...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...