Jump to content
SAU Community

R33 Antenna Always Up With New Headunit

Ryan12

By Ryan12,
in Car Audio & Electrical

 Share

Recommended Posts

Ryan12 Explorer

Ryan12

Posted
Posted

I just bought a new headunit for my r33, its a Pioneer 7050BT - Now when i was wiring it up it didnt appear to have an antenna wire of any sort, so its basically just wired up now when the ignition comes on the antenna pops up.

Is there anyway of wiring up this unit so that it only pops up when i turn on the radio rather than having it up all the time? My previous $80 headunit had this antenna feature but not this $500 unit.

If there is someway i can do it that would be great!

hypo32 Contributor

hypo32

Posted
Posted
I just bought a new headunit for my r33, its a Pioneer 7050BT - Now when i was wiring it up it didnt appear to have an antenna wire of any sort, so its basically just wired up now when the ignition comes on the antenna pops up.

Is there anyway of wiring up this unit so that it only pops up when i turn on the radio rather than having it up all the time? My previous $80 headunit had this antenna feature but not this $500 unit.

If there is someway i can do it that would be great!

Pioneer has a remote wire which is blue with a white stripe. This is what you use to trigger your antenna, it will pop your antenna up when ever the stereo is on.

Hope that helps..

Ryan12 Explorer

Ryan12

Posted
  • Author
Posted
Pioneer has a remote wire which is blue with a white stripe. This is what you use to trigger your antenna, it will pop your antenna up when ever the stereo is on.

Hope that helps..

Thanks mate

Will the antenna pop up every time the stereo is 'on'... Or only when radio is activated on the headunit?

W0rp3D Grand Master

W0rp3D

Posted
Posted

My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Beer Baron Grand Master

Beer Baron

Posted
Posted
Pioneer only does it when the radio is on.

really? I have a pioneer deck in my silvia. and it puts up the antena whenever the stereo is on, not just for the radio. it's annoying, I only want it up when the radio is on. maybe I can just wire in a switch or something.

Al Grand Master

Al

Posted
Posted
really? I have a pioneer deck in my silvia. and it puts up the antena whenever the stereo is on, not just for the radio. it's annoying, I only want it up when the radio is on. maybe I can just wire in a switch or something.

That's what i did with my Pioneer unit. Wired the antenna to the amp trigger wire and then put an override switch, so that i could manually put the antenna up if i am listening to the radio.

Ryan12 Explorer

Ryan12

Posted
  • Author
Posted
My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Ah yes my bluetooth did the exact same thing. There is a fix however. You download it from the pioneer website (http://www.pioneer.eu/eur/content/support/..._bt_update.html) and save it to your phone and bluetooth it across to the head unit and use the head unit to update its firmware. And now my BT works perfect.

And i think im going to have to make a switch or something, i can't see any way else around it.

Beer Baron Grand Master

Beer Baron

Posted
Posted
That's what i did with my Pioneer unit. Wired the antenna to the amp trigger wire and then put an override switch, so that i could manually put the antenna up if i am listening to the radio.

thanks Al, switch will be the go for me too. it's farken annoying having it up all the time. since whenever i'm in the thing a CD is playing means the arial is up 90% of the time. and if I turn the car off without turning off the stereo first it stays up. plus since the car is so long it looks like i'm driving a go kart with a little flag pole on it so big trucks wont run over me... :P

Al Grand Master

Al

Posted
Posted
thanks Al, switch will be the go for me too. it's farken annoying having it up all the time. since whenever i'm in the thing a CD is playing means the arial is up 90% of the time. and if I turn the car off without turning off the stereo first it stays up. plus since the car is so long it looks like i'm driving a go kart with a little flag pole on it so big trucks wont run over me... :)

If i turn the car off, while i am listening to the radio, my antenna goes down automatically. Don't know why yours stays up :)

  • 2 weeks later...
br3ndan Mentor

br3ndan

Posted
Posted

funny eh...alot of u guys not <500 dollar head units... and the antenna stays up..

mine is i think 120 dollar ken wood unit and it my antenna only goes up if the radio is turned on. And if i turn of the car suddenly with the radio on it will still bring down the antenna.

go kenwood!! haha :laugh:

  • 4 months later...
Al-R33 Enthusiast

Al-R33

Posted
Posted
My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Hey mate maybe you can help me with this... I have a 9800BT decided to give your soltuion a go... I cut the blue and white striped wire, then powered up the unit. The antenna did not go up, but I had no audio at all (no menu beeps, no radio or cd player audio). I connected the blue / white striped wire again which restored audio.

Perhaps I've got my blue/white wire wired up wrong?

Anyone else have these symptoms?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...