Jump to content
SAU Community

Recommended Posts

Just in the process of weighing up my options as to get a spare factory turbo hi flowed or just go for a good second hand GT-RS.

Its going in a R33 sedan, and would like to get about 250-300kwatw.

Any other options i could look into would also be great, and rough prices on hiflowing

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/
Share on other sites

Hey mate,

The two options you have listed are really the best turbos for a decent power increase without chasing too high a figures and without having to change much more about the car ie: keeping it looking standard.

A hi-flow on a standard turbo will get you up to around 240rwkw maximum

A HKS GT-RS Kit will get you closer to 260rwkw.

Now be aware that both of these options need some additional mods.

At the minimum you would be looking at upgraded engine management in either the form of a SAFC or Power FC, new fuel pump and if your going over 240kw it would be a good idea to do injectors to (Power FC required). At these power levels the standard clutch would also be towards its limit.

So in answer to your question :cheers:

I personally would go straight to the HKS GT-RS kit. High flows are not exactly cheap and from experience ive learned its best to aim a bit higher and do it right once, the first time. This kit will give you awesome response and great usable street power. You will be thrilled :)

There are some traders on here selling the GT-RS kit for $2800~

To get a standard turbo high flowed by GCG is approx $1600~

Hope this was some help buddy :)

-Dragonforce

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4340711
Share on other sites

Thanks for the help guys :(

Was nearly going to buy a good second hand gt-rs but wasn't sure if it would be overkill. The hi-flow question mainly because i have a cactus std neo turbo in need of a rebuild.

Thanks again for the help, much appreciated :)

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4341060
Share on other sites

GCG with cams= 260rwkw, brand new turbo. cops wont know its there

where you mentioned a second hand GTRS... and it says HKS on it.

check out the turbo sticky thread and do a search :( some epic threads on GCG's, GTRS's, and the GT30series.

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4342240
Share on other sites

What about a GT2871R?

They do a Skyline version of it now at horsepower in a box

Thats what im considering for my turbo upgrade atm. Pretty sure there garretts answer to the HKS GT-RS which i was originally considering

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4342235
Share on other sites

Get a hi-Flow with VG30 rear housing, Im aiming for about 260-270rwkw with my auto after I get the rear housing Fitted and retuned with the Vipec.

A guy in sydney is getting 320rwkw from this same turbo in a manual, but I think he is running a forged motor with a few more intake and fuel mods.

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4342566
Share on other sites

Yeah that was going to be my question , the GCG Hi Flow with the VG30 0P6 turbine housing .

Internally they are a fair bit bigger than the RB25 housing so with other top end work they are supposed to go well and not have any extra turbine lag .

I'd like to see better wheels in the high flow but I think it may be a case of the small frame GT BB turbine shafts being too small/short and the larger frame GT turbine shafts being too big in diameter .

A .

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4342607
Share on other sites

I am currently running the slide hi-flow max over size with the OP6 VG30 rear. The turbo has been excellent with no problems, but it is now time to grab some more power so i will also going the 3076 with the .82 rear. The best power that the hi-flow could get me was 250rwkw. This is at 17psi but when it was bumped up to around 19-20psi the power would drop of so the tuner left it on 17 stating this was the best power curve he could attain. He said this was probably due to the turbo running out of puff up top.

Link to comment
https://www.sau.com.au/forums/topic/250558-turbo-options/#findComment-4342801
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...