Jump to content
SAU Community

Recommended Posts

wat dan means by hitting it is the cover on the back of the headlight there is a cover togain access to the bulb and it has a tag that sticks out and nissan puts a torx bit screw in the way to stop the cover from beign undone. just undo the screw and then you can undo the cover. i think from memory the screw is a tamper proof torx bit.

I installed those 6000k's that Dan was selling and they look superb. They don't look blue at all and haven't attracted any unwanted attention at all.

I do find however that I had to lower the level of the headlights to the lowest settings (my 34 has that level adjuster knob under the steering wheel) On middle setting I was getting flashed by oncoming traffic so hmm .. but that was same day as I cleaned my headlights so might have had something to do with that and not the new globes. Either way even on lowest level setting they look great and put out good light.

  • 1 month later...
I installed those 6000k's that Dan was selling and they look superb. They don't look blue at all and haven't attracted any unwanted attention at all.

I do find however that I had to lower the level of the headlights to the lowest settings (my 34 has that level adjuster knob under the steering wheel) On middle setting I was getting flashed by oncoming traffic so hmm .. but that was same day as I cleaned my headlights so might have had something to do with that and not the new globes. Either way even on lowest level setting they look great and put out good light.

Hi All,

I have recently got a new set of 6000K bulbs from Dan and they look the goods! Quality light output.

Delta Force you mentioned above that you had to lower your headlight adjustment. I need to do the same in my R34, however on the lowest setting on the in car adjustment my lights are still very high and I get flashes from oncoming traffic.

I have adjusted the screws on the top of the headlight unit itself, this has made little difference. Also the right headlight is sitting higher than the left. Is there any other way besides the above that I can move my headlights to face down a little more? Has anyone else had the same problem? Is it a common problem with R34's? Not real keen on taking the front of the headlight off with a heatgun....

Any advice or help would be greatly appreciated.

Cheers - Kyle

Hi All,

I have recently got a new set of 6000K bulbs from Dan and they look the goods! Quality light output.

Delta Force you mentioned above that you had to lower your headlight adjustment. I need to do the same in my R34, however on the lowest setting on the in car adjustment my lights are still very high and I get flashes from oncoming traffic.

I have adjusted the screws on the top of the headlight unit itself, this has made little difference. Also the right headlight is sitting higher than the left. Is there any other way besides the above that I can move my headlights to face down a little more? Has anyone else had the same problem? Is it a common problem with R34's? Not real keen on taking the front of the headlight off with a heatgun....

Any advice or help would be greatly appreciated.

Cheers - Kyle

Kyle, yep I've got no idea about why your height adjust isn't moving much, on my car at 1.5m distance to a wall I get a full 75mm drop from the high to the low setting, so on the road you ca imagine this is a marked change in distance.

Is the adjustment motor making a good bit of noise when it works, or does it sound like it may be sticking?

  • 11 months later...

Sorry to dredge up an old thread, but I would like to know if there is a significant difference between the brightness of light produced between the 6000K and 8000K bulbs. My stock bulbs are terrible and I think it is time to replace them before they become too dull and a safety hazard.

Would also be curious to know if anyone has installed a 6000K in one headlight and a 8000K in the other to show the difference in colour and brightness?

  • 1 year later...

hey :) i have 10000K 35watts :) ebay kit (see below of coloure) there really blue but no good out of town ... i went and brought a 2nd kit 100W 6000k white kit and installed it in my 34 wires still going strong running 4ballest ... 2 kits :) i can add pics if you like

  • 2 months later...

I've had a HID kit sitting here for nearly 2 years, i was quoted $400 to install them and thought f**k that and never got around to doing anything about it, but after reading this thread i'm keen to get them in, i'm on the central coast of nsw, and i'm looking for some one to come do it for me, ill buy you a case or drop some cash your way *not too much im quite poor :P*. any takers?

Is it correct that the Higher you go in Kelvin the less light lumens you get? So the less actual light?

As for standard, I live in the country, no street lights at all out my way and when driving my Stagea at night I never use high beam, so standard "should" be fine for most people.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...