Jump to content
SAU Community

Recommended Posts

I am very confident I could pop each and every one of those 3 you have had on an Rb25 within a day , given a go at them :blush:

how exactly? without increasing the boost it'd be the same as every other day for the last year

not really worth it but myne made a touch more peak power on 15psi than it did on 13

how exactly? without increasing the boost it'd be the same as every other day for the last year

not really worth it but myne made a touch more peak power on 15psi than it did on 13

bolt on ebc so it actually holds 1bar till redline (big difference between getting to 1bar and then dropping boost as revs climb) and then take it to the local circuit on a sunny day. guarentee I'll get you 3 dead turbos before the end of the day.

It's the same bleating you get from some GTR owners who don't know better and it's also actually really a stupid way of increasing performance given the risk.

When the ceramic turbine lets go you can end up 'dusting/sanding' your piston bores with ceramic particles. There are again plenty of examples of 'damn I lost my turbo......wonder why my car is using more oil and compression is down?'. I had some very old GTR turbo's let go.No suprises, it did just that.

I'm not being a kill joy. You can still run a high 12 or low 13 1/4 with just 10-12psi in an R33 or R32 with one of these turbos.

I have.

Want more power?

Go and buy a buy a bigger turbo with a metal turbine easy fix.

When the ceramic turbine lets go you can end up 'dusting/sanding' your piston bores with ceramic particles.

I have only heard of this with GTRs, possibly because the twin design is more susceptible to allowing particles back up the exhaust headers. Does it happen with GTS-t's too?

I have only heard of this with GTRs, possibly because the twin design is more susceptible to allowing particles back up the exhaust headers. Does it happen with GTS-t's too?

The gtr's are more likely to get hurt but, the same risk is there.

So, judging by this thread, it is 100% true that the Series 2 R33 turbos do NOT Have a ceramic turbine, but rather have aluminium?

And therefore can be boosted higher than a Series 1 turbo?

I'm posing this more as a question, rather than a statement as I do not know the correct answer.

If someone can confidently confirm this, please go ahead.

Regards,

So, judging by this thread, it is 100% true that the Series 2 R33 turbos do NOT Have a ceramic turbine, but rather have aluminium?

And therefore can be boosted higher than a Series 1 turbo?

100% wrong. See my first post in this thread (#5).

no they both have a ceramic exhaust wheel. (the back one)

s1 has steel compressor wheel (the front one)

s2 has a "nylon" compressor wheel (the front one) which someone (trent i think...cbf looking) mentioned was actually aliminimum with a nylon component somewhere along the lines

12psi

stand alone ecu with aggressive tune

good tyres

pineapple, camber, castor kit

short shift kit

intercooler

good 3" turbo back exhaust

cold air intake

there wont be much on the street that can beat you in this setup

should make around 190-200rwkw

Hmm not sure about your area you live in Paul, but around here 200rwkw in a skyline just doesn't cut it (for a street car).

bolt on ebc so it actually holds 1bar till redline (big difference between getting to 1bar and then dropping boost as revs climb) and then take it to the local circuit on a sunny day. guarentee I'll get you 3 dead turbos before the end of the day.

i ask how you'd do it without increasing the boost and you say ur gna bolt on an ebc so the boost doesnt drop off, hence increasing the boost :)

probably never get driven with stock turbo again anyway, will have a gt30 within the next few days

i ask how you'd do it without increasing the boost and you say ur gna bolt on an ebc so the boost doesnt drop off, hence increasing the boost :(

probably never get driven with stock turbo again anyway, will have a gt30 within the next few days

If you say 1 bar we mean 1 bar do we not?

If you go around telling people that stock turbos can hold 1 bar all day, then neglect to tell them you didn't mean " 1 bar all the way to redline". They may own a skyline with an ebc and then on your good advice will lead to a nice dead turbo and possible engine damage.

Adding an ebc to 'hold 1 bar' is not "increasing boost" as far as this argument is concerned. It's 'holding boost'.

The GT30 will be fun. :D

I wouldn't bother running more than stock boost unless you get a powerfc or tune your factory ecu as you'll run into R&R issues pretty quick and the car will run like crap.

Since you're in NSW, come down to Sydney .. Toshi can remap your stock ecu for < $500 ie. fix up the AFRs and ignition timing. Much cheaper than a powerfc tune and will allow you to run as much boost as you feel is safe, i'd recommend no more than 11.5psi - that's what mine's set to but I have an R34 GTT.

  • 1 month later...

my car only has pod filter and a boost controller set to 10psi running over a year now. Making 150rwkw at least. Just had 9/12 manifold bolts replaced and turbo gasket replaced due to all of it being broken or cracked etc. Leaking heaps of air. Haven't dynod with problem fixed yet. But yeh. Initial duno was 150rwkw with just those mods. Hope that gives u some kinda indication.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...