Jump to content
SAU Community

Recommended Posts

  • Replies 181
  • Created
  • Last Reply

Top Posters In This Topic

NEW ENTRY FORM

MUCH EASIER TO UNDERSTAND TOO

http://members.iinet.net.au/~gavingriffith...tryform2010.pdf

Just to be aware folks, there was a typo which I did not spot until late last night on the original form that I was given to begin redesigning it from (You can blame me for any problems) If you look, the two images from my photobucket account above that Matty has linked to show the wrong end date. This has been corrected in the PDF link but I will not be able to do anything about the photobucket ones until tonight when I get home. Any entries coming in from the JPG images with and end date of the 14th will still be accepted but I suggest using the PDF link, it will print more clearly in any case.

There are also some pricing differences in there in the way things are grouped together. Nothing is more expensive than before and most "Packs" are a couple of dollars cheaper than the previous prices combined. That is to say it is slightly cheaper to enter with a full event pack than it is to enter the sprint and the show and shine and to buy a dinner ticket and promo pack seperately.

Paul.

EDIT, SemislickR32. No, if you have entered on the old form you do not need to enter again.

Edited by Blue

OK, photobucket fixed. I re uploaded them with the same file names so the forms are still in Matty's post. This entry form is now uploaded on the Skyline nationals website so people should be seeing the same form from any current place to get them.

I suggest using the form direct from the nationals website so that if any further changes are made you get the current form. I do not expect the form to change between now and the event though.

http://skylinenationals.com/2010_Skyline_N..._form-final.pdf

Sent (and paid ) my forms off 4 months ago and emailed again 3 weeks ago and no reply :mad:

who did you email? I sent one through today and got a reply 3 hours later. Email was sent to : [email protected] (via the skylines national website)

Just to confirm, any model vehicle is welcome to enter the super sprint at Mallala. There is also 4 different groups, standard non turbo, standard turbo, modified turbo and 100% track car group etc.

Ryan

who did you email? I sent one through today and got a reply 3 hours later. Email was sent to : [email protected] (via the skylines national website)

Just to confirm, any model vehicle is welcome to enter the super sprint at Mallala. There is also 4 different groups, standard non turbo, standard turbo, modified turbo and 100% track car group etc.

Ryan

They have the cash , just to slack to send a reply
So what is the likely timetable and format for the track day? Time attack or racing

The exact format of the day is being settled but things should start to happen on the track itself by 10:00 with scrutineering starting at your normal sort of 08:20. Supp regs and formal sprint entry forms should be gong out very shortly to those who have already entered the sprint on the main nationals entry form.

The day will be a multi car supersprint format against the clock, not racing. Racing would exclude almost everyone who would want to enter as that would require a C level license not an L2S.

OK, I should have Rbware sorted now, if anyone else has missed out on an entry confirmation could they PM me about it so I can follow it up?

REV-031, if you want to do it, just do it! There is no pressure at this type of event to go any harder than you want to, so if you just want to cruise around at a moderate pace and get a taste for it then there is nothing to stop you doing that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...