Jump to content
SAU Community

Recommended Posts

  • 3 months later...
  • 1 month later...
  • 1 month later...
I han't done a Neo head.. but I'm guessing that Nissan didn't stray too far from what they already know works.

Please take another pic, up close and front on, just like mine so everybody can see what your looking at.

Top work on the mod. Im about to embark on this procees, Where did u get the replacement plug, Did u press it back on or hammer

Thanks

I have had a look at the neo head and it has a bearing feed running off the head gallery and a seperate feed just for the vvt.

You wont be able to pull the plug out and drill it like the r33 head.

Im appears the vvt solenoid blocks the oil pressure when the vvt is off and when engaged, it pressurises the vvt solenoid. when disengaged the oil pressure bleeds back through the solenoid instead of the constant loss

  • 1 month later...
I have had a look at the neo head and it has a bearing feed running off the head gallery and a seperate feed just for the vvt.

You wont be able to pull the plug out and drill it like the r33 head.

Im appears the vvt solenoid blocks the oil pressure when the vvt is off and when engaged, it pressurises the vvt solenoid. when disengaged the oil pressure bleeds back through the solenoid instead of the constant loss

just doing the conversion atm.. looking at drilling through the bucket gallery into the vct gallery between the first cam journal and first lifter bore then plugging the entry point back up.. anyone know what the original neo oil restrictor size is for the vct.. I only have a head thanks

  • 2 weeks later...
  • 1 month later...

Tried this mod whilst doing my rb30 conversion, worked great, was very simple and tidy

drilled out the oil returns in the head and ran a rear head oil drain kit but decided not to restrict or block the oil feeds in the block, but i seem to be losing a hell of a lot of oil still from the breathers. . . i was wondering if anyone has considered drilling out the 1.5mm oil in the brass plug to 2mm, in theory i would think the head would still have enough pressure to engage the vct but also drain more oil when the vct is off in the higher revv range

has anyone tried this? or think it may work?

Cheers

Jarrod

  • 4 weeks later...

going to be doing this shortly for my 30det. theres plenty of info around on restrictor sizes with or without vct, but all the info for vct heads include an external oil feed. what size restrictors would work best with this internal feed on a street driven 30det? i ordered a couple off the net and got sent 1x 1.5mm and 1 blocked, worried it might not be enough oil for normal driving?

I'm building a 25/30 combo but don't want to use the VCT, is it better to have the solenoid off or on?

I'll be doing this mod but only to supply the front cam tunnel with oil.

Has anyone got any info on not using the VCT?

cheers shaun.

good point. Whatever was there - I'd assume the RB30 restrictors then.

Wonder what size they are?

2mm i think. factory 25 are 1.5mm i think.

i ended going with 2 ~1.6mm feeds, works out a little less than factory 25 by my calculations which should stop any blow by without starving the head

Johnno let us know how your engine goes, i think the rb30s have two 1.8mm standard, with leaving them standard i was still getting way too much oil to the head.. a bit of spirited driving would result in quite alot of oil coming out of the breathers... i think im going to 2x1.3mm this time

Jarrod

Forgot to mention, thats with a rear head oil drain and all of oil drains drilled out in the head only, and the two factory rear oil drains dremeled out a bit, as well as the smaller restrictors im going to try and stick a descent sized hose from my catch can to the sump to allow both oil to return and the blowby from the engine to escape without clogging up the oil returns in the head

Jarrod

does anyone have any pics of exactly where to drill out the oil drains in the head?

now you have me wondering if i should make them smaller than 1.5mm, are the standard 25 feed definately 3x1.5mm? because i wasnt getting much blowby at all with the 25 so i figure aslong as i keep it less than standard 25 it should be fine

Edited by JonnoHR31

With regards to the oil restrictors in the rb25 standard, im not 100% sure to tell you the truth, i have heard conflicting sizes, most people say the two feeds are 1.5mm, but when comparing them to the size of my 1.5mm tomei restrictor they look slightly smaller, i have heard of ppl measuring them up to be 1.3mm, the vct feed i have heard it being anywhere from 1.5-1.9mm =/, when my engine is apart ill measure whats in there now

As for the oil returns, you can see at the bottom of the block what holes go through to drain into the sump, so just follow them through to the head and youll know what to drill.. from memory im pretty sure all the small oil return holes are on the exhaust side, im going to attempt to get the two large holes at the back of the head drilled out more, i know a drifter that claims he drills them out a fair bit.. i only dremeled them up abit as i was afraid of hitting anything important.. ill let you know what gets done, but it wont be until i get my engine pulled back apart next holidays

Jarrod

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...