Jump to content
SAU Community

Recommended Posts

^^^^

That thing sent shivers down my spine every time

It went past. *insert homer drooling noise here*

I know we had our whole garage stop and watch everytime it was coming down the straight!!!

Would love to know what he is revving that thing too

Found that the returns on the hot side of the sump were to low and was puhing up oil through them, moved some and put a EARLS one way valve on the return from the catch can and NOW ITS THE AWESOME.

Glad to hear it's sorted mate.. Now you can enjoy the thing

Found that the returns on the hot side of the sump were to low and was puhing up oil through them, moved some and put a EARLS one way valve on the return from the catch can and NOW ITS THE AWESOME.

Glad to hear it's sorted mate.. Now you can enjoy the thing

The close ratio box in the 34 makes the car sound like it's revving lower than it is.. The 32 has a wider ratio so the more time between changes make it seem like it's revving to 11,000rpm.

Agreed the best sounding car of the meet!

I just find it hard to believe that someone would choose a setup based on the exhaust note rather then the way it actually drives

Ps. Read my signature :)

I know what you're saying buy there are too many negatives IMO which is why I wouldn't do another rb30.

Gtrs's do suck on my 26, I am in agreeance :) Choo choose as paul would say

I know what you're saying buy there are too many negatives IMO which is why I wouldn't do another rb30.

Gtrs's do suck on my 26, I am in agreeance :) Choo choose as paul would say

how-to-draw-a-steam-train-10.jpg

OR

choose240x186.jpg

Couldn't decide which one, so you got both :D

keir wilsons os giken rb30 is insane!

if my income was not tied up in real estate & my engine went bang - this is the only way i'd do another rb30 (to keep the height the similar to the rb26)

mark berry's r32 - great doco!

i know kinda off topic BUT still within the over 400kw club :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...