Jump to content
SAU Community

Sports Susp On 03 Prem/coupe?

GT350

By GT350,
in VQ Series - V35, V36 & Infiniti

 Share

Recommended Posts

GT350 Enthusiast

GT350

Posted
Posted

Hi all, how can I tell if my auto 03 Prem/ coupe is running the OEM sports susp, that is comp/plate Nos, or maybe something else! Hope someone can 'HELP' :P I don't have the Brembo brakes either just the STD brakes, I've also been told that some non Brembo coupes where fitted with sports susp, anyone out there got some INFO! Thanks G.T.

Link to comment
Share on other sites
whtbox Community Regular

whtbox

Posted
Posted

i don't understand about the sport suspension.

All i know the suspension are all the same as standard, whether they are premium or not. Unless they add an option for the Bilstein Suspension kit which the shock body have the Blue colour on it and a bilstein Letter around it.

Link to comment
Share on other sites
GT350 Enthusiast

GT350

Posted
  • Author
Posted
i don't understand about the sport suspension.

All i know the suspension are all the same as standard, whether they are premium or not. Unless they add an option for the Bilstein Suspension kit which the shock body have the Blue colour on it and a bilstein Letter around it.

Yer, maybe your right! I think it maybe an American thing with there G35s, they talk about it quite often in there forums, and maybe all our v35 skyline coupes are just fitted with stock susp who knows! Regards G.T.

Link to comment
Share on other sites
NISMO Grand Master

NISMO

Posted
Posted

The US G35's where the only one's that got a "sport pack" Consisted of revised shocks, springs sway bars and 19inch wheels.

Also if you dodn't have Brembo's it would be an auto correct? As all manual 03/04 coupes had Brembo brakes.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MrStabby
      ATTESSA and pressure switches

      By MrStabby · Posted

      Looks like both of my cars have pressure switch issues. The R32 GTR has 18 flashes on the ATTESSA controller which is "ETS pressure switch circuit". The 4WD light is intermittent, and often just restarting the car clears it. There is an $300 replacement option https://www.ebay.com.au/itm/285675135148?itmmeta=01HXN3YKRGKQ08GRZ5KFKKZWJT&hash=item428390a0ac:g:6CcAAOSwWxBltMEG so if it becomes a permanent issue and I can confirm that the switch is the issue, i have a solution. The NM35 is reporting C1208, and disconnecting the switch causes the 4WD light to go away. Translating from the Japanese shop manual "when the pressure is reduced to 2.6MPa (377 psi) or less: conduction occurs when the pressure increases to 3.8MPa (550 psi) or less: conduction is present. Reference: • Immediately after the E-TS actuator motor stops, the pressure inside the accumulator is high and there is no continuity." Not sure how good the translation is but from what i can deduce this means the switch is normally closed (NC) and as the pressure builds from 0 to 550 psi the switch stays closed, then opens and 550 psi. As the pressure drops from 550 psi to 377 psi the switch stays open then closes again at 377 psi. Is that how these things work? These pressures are a lot higher than the R32 ("control pressure 0-228 psi") but i'm hoping i can find a generic switch (like they've done for the R32) to use as a replacement. Maybe something like https://www.ebay.com.au/itm/355586397452?epid=1676016964&itmmeta=01HXN534AF22ACTG6TGDDQGEQ7&hash=item52ca99d50c:g:mAEAAOSw8ilmBcMh&itmprp=enc%3AAQAJAAAA8LtWdNlWHgyJ%2F3cbw25S2A1lde3qBi3fJii4T3lQavCz4kpqiD42SmBa4FocMvXCjcxiowHjb8vZ8%2BWxc53BkHv781tkStSnCDaenfGKC3bIp0keK20dfsn9LoPa3TfqaEmAydqqyKobgTdXsGGzsl%2BRjOVGuD8OIpOv%2B0wMl7aUtHg0iJtojbtzA%2BRS8Xfm8Ufjuvz4niwrqglAXFUbkL6J%2FGuHPeeECZhLBBN3iNM1Swl94Fv5zE95YK%2B5O6dxDN1ySNOjdMxkA8yaprbuwRHFQv1nlGh%2FWjekj6EUFR2%2FO4HTsoKtSAkY0Mj1w1uf1w%3D%3D|tkp%3ABk9SR6zFjKXtYw but with a lower close pressure, and thread adapter if required. Am i dreaming?
    • GTSBoy
      Misfire/stalling issues

      By GTSBoy · Posted

      Won't be.
    • GTSBoy
      In Need if Help with Signal lights: Constant on

      By GTSBoy · Posted

      That is a dead f**king short of B+ to ground. Scary.
    • Butters
      Rebuild vs second hand NEO?

      By Butters · Posted

      10-15 years ago, the answer would always be buy a good import motor and so many machine shops make.a hash of an engine rebuild, or they think they are some sort of RB magicians and want 40k.      Now as others have stated, you are buying a VERY old used motor. So rebuild is the correct answer.  Just finding a machine shop that will both do a good job and charge you a regular price is now your challenge. 
    • SLVRBAKSLPZ
      In Need if Help with Signal lights: Constant on

      By SLVRBAKSLPZ · Posted

      SOLVED   simple solution. After wrecking by brain, i ended up jist giggling everything i could. At one point last week I noticed that the left side signals shut off for a split second. I wasn't sure what triggered it. I spent time cleaning up wiring, re-wrapping and adding DT connectors to my IC7 stuff. I bought a new hazard and stalk hoping that would work. The stalk did fix some function issue but not the steady on. Hazard didn't fix it. I started just tracing everything. Once I got to the engine bay I notice my engine harness was droopy. I started moving it and the signals flickered. Come to find out that the starter + turned off sigmals when it grounded out on a bolt I have a Wiring Specialties pro harness so I'm not sure if this is specific to it. So it should work proper once I hook everything up   20240511_190033.mp4
×
×
  • Create New...