Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i was dissapointed with 179rwkw. Talked to the guy later and he said that the dyno has been reading quite low.

To the guy in the monaro who thought he would win, kevin (lauz's dad) in the r32 GTR got 321kw so in ya face haha

i was dissapointed with 179rwkw. Talked to the guy later and he said that the dyno has been reading quite low.

To the guy in the monaro who thought he would win, kevin (lauz's dad) in the r32 GTR got 321kw so in ya face haha

im assuming Dan was running the dyno?

thanks for the pics Niroj! yeahh ahh well i guess it was fun cept the whole waiting thing lol.

Lol @ the mitsubishi 4WD that got dynoed and the guy raged that he only got like 70rwkw hahaha

Yea thats what he says, i call bullshit

Err.. hes one of my best mates and I have been through the entire build up process of that car.

Ask Dan at Springy who looked over the car - How is a stock toyota ECU that had speed cut at 180 (which is why it cudnt pull over 307), Yellow injectors for EVERYONE to see, standard coilpacks (no DLI or larger) an external wastegate with NO form of boost control, bullshit?

When the Sard 800cc injectors,ignition upgrade(coils) and the PowerFC go in, then itll make the sort of power the motor it was built for .

Just because ur RB25 made a laughable 170 at the wheels doesnt mean that other people talk shit. If you had half a clue, the bonnet was up most the time for anyone to see, but I suppose the most youd know about is blow off valves and boost controllers -

Edited by Starionturbo
Err.. hes one of my best mates and I have been through the entire build up process of that car.

Ask Dan at Springy who looked over the car - How is a stock toyota ECU that had speed cut at 180 (which is why it cudnt pull over 307), Yellow injectors for EVERYONE to see, standard coilpacks (no DLI or larger) an external wastegate with NO form of boost control, bullshit?

When the Sard 800cc injectors,ignition upgrade(coils) and the PowerFC go in, then itll make the sort of power the motor it was built for .

Just because ur RB25 made a laughable 170 at the wheels doesnt mean that other people talk shit. If you had half a clue, the bonnet was up most the time for anyone to see, but I suppose the most youd know about is blow off valves and boost controllers -

1) larger wastegate spring

2) remapped ecu

3) high flow injectors

As for the speed cut, if you want ppl to believe that everything is standard then of course you would leave the speed cut on.

You seem to be getting very defensive, are you going to tell me that this sort of power from a standard 1j is normal, this sort of power from an untouched 2j is not normal.

Also i assuming it was 300rwkw?

Edited by W0rp3D
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...