Jump to content
SAU Community

Recommended Posts

Anyone know a good place to serve as a backdrop for car pictures in sydney?

cobblestones would be great, industrial backdrops also ok, or water ..

No other cars around, and no hassles from authorities if you want to take your time to screw around with a tripod?

What colour is your car? The colour of the car determines what backdrops work.

Not getting hassled, especially in a flash car, is a pain these days. Have a read of this blog post by Charles Kha, editor of AutoSalon Magazine.

Industrial parks are the best, as they're generally deserted on weekends. Unfortunately almost all of them are concrete grey, so if you own a monochrome car (especially silver or white) it doesn't come off the background properly.

As a silver car owner, it's something I constantly struggle with.

Edited by scathing

I think the best thing to do is go out for a random drive and start finding locations. Thats what i use to do :P

Everything from car parks to beaches to locations in the city, to under bridges etc etc..

I think my fav spot is still at Sydney art gallery :D

Here are a few examples from different places.. Just experiement and have fun taking photos :D

- carparks

IMG_1673upload.jpg

3bbc.jpg

- Art gallery

as.jpg

etc etc..

just have some fun :D

What colour is your car? The colour of the car determines what backdrops work.

Not getting hassled, especially in a flash car, is a pain these days. Have a read of this blog post by Charles Kha, editor of AutoSalon Magazine.

Industrial parks are the best, as they're generally deserted on weekends. Unfortunately almost all of them are concrete grey, so if you own a monochrome car (especially silver or white) it doesn't come off the background properly.

As a silver car owner, it's something I constantly struggle with.

It is black, so night shots are a little harder to do properly.

thanks for the tips everyone. I'll post results when I get my new rims on. (I always seem to be waiting for just that one more modification before deciding it is "ready").

McMahon's Point is also good, if you go before the sun comes over the horizon.

You can get the Bridge dead on, but you have to get there before it fills with people or the morning sun shines into the camera. By mid morning, forget about it. Way too crowded.

Are there any office buildings with massive glass panels down to ground level & where you can park at the front?

The glass must be clean lol. It should be able to reflect a setting sun rofl.

The car is black pearl. yeh narcissistic

Find some lit alleys with grafitti to back up behind light coloured cars. usually looks the goods.

His car is black, but I concur. I forgot that I took these pics of my girlfriend's car when I was scouring my gallery:

minimx5_20080727_graf_01.jpg

minimx5_20080727_graf_03.jpg

minimx5_20080727_graf_04.jpg

You just need to find some graf that is a really light colour - my side on "Sin City" one isn't ideal, even with the stupid flash reflecting off the paint.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...