Jump to content
SAU Community

Recommended Posts

it was a great night, my 1st of hopefuly many :rolleyes:

put my car on the dyno, to see what my base figure is and to check its tune

got 123.8kW with only a Pod and 3" catback

i was car #21 the white 180sx

here are the graphs

post-59633-1234567940_thumb.jpg

post-59633-1234567999_thumb.jpg

  • Replies 152
  • Created
  • Last Reply

Top Posters In This Topic

When the cops set up the "block" I promptly went down and chatted to them. They understood perfectly well that it was for charity and as long as there were no heroes, then it'd be fine for them. We relayed this message to everyone inside and I'm gonna hope for now that the s14 was either f**king about or just had bad luck.

OH NOES! www.fmylife.com , go contribute.

The cops were cool, we never have problems at R.E nights. Like anything, there are good and bad.

It doesn't help when everyone on the street piss bolts over to crowd around when shits going down, yeah! lets make the dudes with the power feel intimidated!!

On that note, thank you sincerely for attending, people.

It's a long night for all involved and we appreciate it all.

CFA, Red Cross and Wildlife Victoria thank you as well.

Till next time mofos!

P.S Also, that white 34 GT-T, sleepy much?

P.P.S Ruffels, it'd be nice to get a thank you for, ya know, finding your wallet. :rolleyes:

hey mate how did u end up going with the stickers? haha 310 for the gtt yeh? spoke to u bout getting my s14 done at sams when its ready.

good to see Ruffels stock 33 make 160.4 on stock boost and Hekt1k made 156.4 on stock boost also no mods bar exhaust

just got back. cops are loving it. there all over the joint.

both sides of the service lane. couple down center road. princess hwy, and i bet westal.

I think I left at the right time then.

Was a really good night, as always. Thanks Matt!

OH NOES! www.fmylife.com , go contribute.

LOL that site is funny:

"Today, I texted this girl I really like and she didn't answer. She did about two hours later and it said "sorry I was having sex at the time you texted me. So how are you?" FML"
Hahaha nah too much effort!

Tell Donny to bring the NUR r34 gtr or even the nismo bayside blue 34 gtr! :rolleyes:

See ya tonight man.

Liam.

Yeah Liam, Tim (not Donny, LOL!) bought the R34 GTR V-Spec II Nur along but he was car number 53 inline and when he arrived they were only up to car number 30.

He had to leave and could not wait. It would be good to see if it still pulls 306 rwkW's like last year at RE Customs.

Tried finding you last night... I should have just called you... You still got same number?

Some nice cars there last night, a lot of EVO's too.

Jamie - sorry I couldn't find you to say goodbye last night.

Hey Julliet!

Yeah thats cool, I went to the car park to see if you were still around. I left around 11:30pm.

Anyway as long as we all got home without any issues its all good!

BTW I had a chat to a group of NissanSilvia fellas, they are a funny / silly bunch LOL! One of them wanted to go into Club Eight to have a "Poke" at $120 for 30mins LOL!

We all deared him. Was funny and staring at the guys walking out of the place...

lol be pretty funny if we all went down there to Club Eight and took a number and sat and waited.

might need to call in the casual's to do the overtime.

i got a strange stare from three coppers standing next to there cars on center road as i went past. might of be a 'thats a loud volvo face'.

what i found amusing was this group of about 4 odd looking dudes, when i was backing my car up heard the convo go like "is that a liberty ? looks like a toyota, ... nah man its is a liberty"

any one know what PROEVO put out ? last i saw it had no cooler, had some kind of Cold air ice box thing

lol be pretty funny if we all went down there to Club Eight and took a number and sat and waited.

might need to call in the casual's to do the overtime.

i got a strange stare from three coppers standing next to there cars on center road as i went past. might of be a 'thats a loud volvo face'.

what i found amusing was this group of about 4 odd looking dudes, when i was backing my car up heard the convo go like "is that a liberty ? looks like a toyota, ... nah man its is a liberty"

any one know what PROEVO put out ? last i saw it had no cooler, had some kind of Cold air ice box thing

Did you go for a run? I saw your car parked but didn't see it going in?

Yeah Liam, Tim (not Donny, LOL!) bought the R34 GTR V-Spec II Nur along but he was car number 53 inline and when he arrived they were only up to car number 30.

He had to leave and could not wait. It would be good to see if it still pulls 306 rwkW's like last year at RE Customs.

Tried finding you last night... I should have just called you... You still got same number?

Some nice cars there last night, a lot of EVO's too.

Ah yeah thats right tim hahaha

I only stayed for an hour as I had something on later in the night, some bloody nice cars there! there was a midnight purple 32 gtr that looked absolutley mint!!

pm me your number jamie. I went swimming in a pool with my phone still in my pocket and it drowned haha

Did you go for a run? I saw your car parked but didn't see it going in?

yeah i went one around 12.30am

got 132kw with airbox, and a really rough line.

last time 140.2kw with pod and a very smooth line.

think i know what will fix the problem, high flow my turbo , piggy back Greedy unit, fuel pump, and shift kit, and a few other bits

should smooth out that line (anything for an excuse) :domokun::)

any one know what PROEVO put out ? last i saw it had no cooler, had some kind of Cold air ice box thing

282 I believe...

Good night, well done to all the boys at RE for putting on a great event as usual, with another massive turnout, and Matt on the BBQ :domokun:

yeah i went one around 12.30am

got 132kw with airbox, and a really rough line.

last time 140.2kw with pod and a very smooth line.

think i know what will fix the problem, high flow my turbo , piggy back Greedy unit, fuel pump, and shift kit, and a few other bits

should smooth out that line (anything for an excuse) :domokun::)

what mods? got 10kw on me, i had full exhaust and thats it last night, installed FMIC today, still need to get my EBC on...

Ryan, Full exhaust . . .FMIC . . High flow panel. mines a series 2, is your 97 series 1 or 2 ?

Was a great turnout. We had 75 cars...finished 3:00am

damn im tired...we've raised $3240 for the bushfire appeal.

PROEVO - i still haven't finished tuning it....atm its 290 @ all 4s, 17 psi we'll be pushing to 25 - 27 psi.

Top stuff Ray. :domokun:

encore ??

Ryan, Full exhaust . . .FMIC . . High flow panel. mines a series 2, is your 97 series 1 or 2 ?

Top stuff Ray. :domokun:

encore ??

s1

was the filthy silver one, #22... hit speed cut in 4th, and was climbing, and hit 134 on kickdown, so with the fmic fitted, it should be close to yours... will re-run when i wire in the EBC, cast just makes life hard haha

ah series one.

well its already has less power at the flywheel to start with, then through the drivetrain and four wheels lost more again.

but yeah just making the whole thing breath alot better is a good shot. its yours a stealth cooler ? or are you going to cut the hole under the battery ?

and yeah i was paying for mine as yours was backing up to the dyno, didnt make it out in time to see it. good that you rocked up though :domokun:

ah series one.

well its already has less power at the flywheel to start with, then through the drivetrain and four wheels lost more again.

but yeah just making the whole thing breath alot better is a good shot. its yours a stealth cooler ? or are you going to cut the hole under the battery ?

and yeah i was paying for mine as yours was backing up to the dyno, didnt make it out in time to see it. good that you rocked up though :(

yeah, thought it would be pretty similar til boost goes up as i had a series 2 cooler on it... turns out larger rear housing did more than i thought :P did you hit speed cut?

got the JJR stealth, PITA to fit, get a blitz!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...