Jump to content
SAU Community

Recommended Posts

I only have the 262 11.95 one here the other one is in the states as its theirs and they have the lobe specs, I just trying to get em to put it on a RB stick

Can do. I know Yavuz put the same lobe that's in mine onto a 2JZ stick and doing a back to back, picked up a decent whack of grunt, everywhere over the longer duration "jap" cams. Can't remember the figure, but it was significant.

You know where he is, get it, take it to him, have a chat.

Also thinking about going smaller duration cams but with same 10.8mm lift that current cams are running

Still happy with current setup with the awesome -9s

I don't disagree, Nick. Why do you need a cam that will allow the engine to rev to 10k when the turbos are done by 7500? Smaller duration cams are only going to push your curve to the left, which, for what you do is perfect!

Give me a 245-250 at 11mm plus lift and I'll be all over it. Bugger top end, big fat meaty curve which noses over at 7000-7500. Done! Hard on the valve train but have it looked at every 20-30 k and IF it needs attention, do it.

The jap cams we spun up were very mild in their temp rate, we had two for reference;

Tomei Procam 270 @ 10.25 mm

JUN 264 @ 10.5 mm

Both of which were alot "softer" in their rate of opening the valve than what Yavuz went for. Over discussions he believes that this cam he developed has the same "area" of a larger 280 but without the huge overlap.

This is why we made our own.

Can do. I know Yavuz put the same lobe that's in mine onto a 2JZ stick and doing a back to back, picked up a decent whack of grunt, everywhere over the longer duration "jap" cams. Can't remember the figure, but it was significant.

You know where he is, get it, take it to him, have a chat.

I'll see how I go, if I can get my hands on one I'll run over to UE and have a chat

Got my unigroup custom grind cams in today, Same as Paulies.. haven't got the price yet though

Those cams on the supra your talking about made over 400rwkw on gate pressure (a bit over 1 bar from memory) on a precision 6466 I think it was from memory. Yavuz was telling me the other day

Got my unigroup custom grind cams in today, Same as Paulies.. haven't got the price yet though

Those cams on the supra your talking about made over 400rwkw on gate pressure (a bit over 1 bar from memory) on a precision 6466 I think it was from memory. Yavuz was telling me the other day

Farken 2J.

That is all! :(

I don't disagree, Nick. Why do you need a cam that will allow the engine to rev to 10k when the turbos are done by 7500? Smaller duration cams are only going to push your curve to the left, which, for what you do is perfect!

Give me a 245-250 at 11mm plus lift and I'll be all over it. Bugger top end, big fat meaty curve which noses over at 7000-7500. Done! Hard on the valve train but have it looked at every 20-30 k and IF it needs attention, do it.

The jap cams we spun up were very mild in their temp rate, we had two for reference;

Tomei Procam 270 @ 10.25 mm

JUN 264 @ 10.5 mm

Both of which were alot "softer" in their rate of opening the valve than what Yavuz went for. Over discussions he believes that this cam he developed has the same "area" of a larger 280 but without the huge overlap.

This is why we made our own.

Yep thats what i looking for ..the Piggaz Version 2.0 cams

11mm 252's sound like a winner .. i always tried to find something like the mines super shore pro 10.05 & 252 , but was after some more lift than what the jap stuff usually was.

Yep thats what i looking for ..the Piggaz Version 2.0 cams

11mm 252's sound like a winner .. i always tried to find something like the mines super shore pro 10.05 & 252 , but was after some more lift than what the jap stuff usually was.

If that is what your looking for then The ones I trying to get made would be exactly what you want, if I can get enough interest in them I'll see if I can get a group buy going

Less duration then them with more lift

Sounds about right. My -9's (335rwkw) start at 20psi and drop to 18 at redline (8600) with standard cooler. Graphs & info in the RB26 Results thread.

Who tuned yours, can I ask?

Frank at Allsparks in east keilor mate, top bloke, knows his shit about RB engines. Didnt even charge me to sort out a check engine light issue I was having where he found that the pfc had the knock sensor way too low

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...