Jump to content
SAU Community

Recommended Posts

Lol! My -9's didn't come with actuators, and I thought I could 'cheat'. Nope you gotta spend the $$$ lol.

Yeah, the nasty compliance cat won't be there for long, but I will still run a cat as I'm soft and don't want the hassles....

Okay. Got a tune done the other day.

Bad news is the stock actuators I put on the -9's can't control the wastegates properly so the boost is wavy lol, even boost controller couldn't keep it steady.

So new stronger adjustable one's are on order.

So good news is the car runs pretty well now and good response, mid range torque is great!

Boost peaked at 18PSI and 288RWKW @6500PRM to 8000.

10psi at 3300

15psi at 3700

18psi at 4000

16 at 4900

15.5 at 5300

16 at 6400 etc.

So that was with stock intake, stock fuel system, stock AFM's.

Non standard parts: boost controller, -9's, Power fc, intercooler, front pipe, and 3 inch cat back, and compliance cat.

interesting... im getting 270rwkw at 15psi

almost the same mods as yous... except no boost controller, cooler or front pipe

lol that boost curve is all over the shop

i've bought a metal racing cat which i will 'modify' for more flow and looking for a decent front pipe...

once those are in my boost should come on as early as yours

then to get some AFMs n injectors n put 20psi through it :D

hey probably noobish question here guys but will the actuators that came with my -5's be able to control boost properly once i get my pfc/injectors in and turn the boost up?

I'm only planning to run 18psi.....or so.

Under 20psi makes baby Jesus cry

Lol

What are your thoughts on them compared to the r32 setup now you've had them tuned etc and it's a more of less fair comparison until you build the motor and turn it up :D

Ha ha Steve-o, yeah 25PSI feels strong lolz!

This setup feels a lot more alive, especially in the twisties. Found that I could stay in a higher gear and not have to rev the guts out of it. It was hitting 18psi around 3600 or so in 3rd and 4th etc when I glimpsed at the display accelerating up slight hilly corners tonight. In a straight line though, it doesn't feel as aggressive as the 2530's on the 32, but the speedo says otherwise....

I liked the way the 2530's came onto boost and charged towards 8000rpm, but there wasn't much happening under 5000rpm, so the 34 with the -9's do work out well, and is just as fast as the 32 with less hp. I wanted more under the curve this time and considering the 34 is heavier, it worked out well. Ploding along in traffic is easy and I find I don't need much throttle to get going.

When one of my mates was driving back in his car after we picked up my car, he said that he could hear the tyres ripping into the road when I accelerated in 1st and 2nd gears, I just laughed as I thought it was funny, but it really has got a nice strong torque band.

Injectors are on 92% duty so there is a little left in them.

Better actuators are on order and a better cat converter. I'm sure this will make it a little better again, so I'm happy with the results.

Yes that's how I would expect these -9/GTSS turbos to work . The reason why they feel good is because they make good torque at lower revs so you don't have to chase high revs to get some pull .

Yes the 2530 and similar dryers make the numbers buts that's because the higher RPM numbers artificially raise the Hp/Kw number . Torque is the measure of turning force and more torque means more acceleration and yes the ability to pull higher gears from the lower mid range engine revs wise .

Eventually people tire of being impressed by high revs and want things that haul from lower revs , often just as fast but a LOT easier to drive and live with .

The feller in the post above I'm sure can understand what I mean when I say these turbos to a degree mimic a larger capacity engine which is what GTRs always needed . With stripped out tarmac racers no one cares what happens south of 4000 revs but when in road going guise that tonne and a half takes some moving when stopping and starting and slothing around in today's traffic levels .

I personally think anyone who wants a fast std capacity road weight GTR has rocks in their heads for not using these turbos . These are good road cars units , maybe not so good for drag or a real racer buy they are so far divorced from what makes a road car good as to be irrelevant .

Your opinions your calls , I don't like/have GTRs but if I had to have one they are what I'd use on the street .

A .

Ha ha Steve-o, yeah 25PSI feels strong lolz!

This setup feels a lot more alive, especially in the twisties. Found that I could stay in a higher gear and not have to rev the guts out of it. It was hitting 18psi around 3600 or so in 3rd and 4th etc when I glimpsed at the display accelerating up slight hilly corners tonight. In a straight line though, it doesn't feel as aggressive as the 2530's on the 32, but the speedo says otherwise....

I liked the way the 2530's came onto boost and charged towards 8000rpm, but there wasn't much happening under 5000rpm, so the 34 with the -9's do work out well, and is just as fast as the 32 with less hp. I wanted more under the curve this time and considering the 34 is heavier, it worked out well. Ploding along in traffic is easy and I find I don't need much throttle to get going.

When one of my mates was driving back in his car after we picked up my car, he said that he could hear the tyres ripping into the road when I accelerated in 1st and 2nd gears, I just laughed as I thought it was funny, but it really has got a nice strong torque band.

Injectors are on 92% duty so there is a little left in them.

Better actuators are on order and a better cat converter. I'm sure this will make it a little better again, so I'm happy with the results.

Awesome, cheers!

Whats better out of -7s and -9s or am I silly for asking this question? Looking at options for my street GTR (which sees a track every couple of months) and looks like everyone loves the -9s and thinks -5s are too laggy, I am very tempted to buy some new -5s cheap off a member here but don't want to regret it?

If I had the following basic mods:

full exhaust including 3" straight through cat, stock dumps

cam gears

power fc

apexi pods

What would you do and would you do more things at the same time to make it more worth while?

Leigh,

Go for -9s, you won't regret it, you're welcome to ride in my R before you decide if you want (that'd have to be next week as I'm moving houses tomorrow and rest of this weekend - late night may be a option).

Have you changed the clutch yet?

Done 100,000km service?

That's all I can think of for now.

Cheers

Grant

Ill be doing the 100k at the same time probably get a kit from Kudos or something, getting some quotes for -9s as well I think they would be best a lot of people think, as for clutch I'm not sure whats in it.. should I wait for it to go bang or what? lol

And yes I will take you up on that ride offer I think! coming to apple peel tomorrow night? if you can make it that would be sweet :D

hells yes Hamish :D its been a while since I've entered a deca and it will be the first time in a turbo charged vehicle so will be interesting to see how I can handle the extra power and if I can put it all down

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...