Jump to content
SAU Community

Recommended Posts

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

Link to comment
https://www.sau.com.au/forums/topic/255972-devostating-dyno-results-for-r34/
Share on other sites

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

I wouldn't trust that site if my life depended on it.

1. The information was all ripped from these forums about 4 years ago.

2. Its out of date, never updated

The best info is always found by searching these forums, rather than some muppet who claimed limited info from these forums as his own.

IMO that site should be shut down as there is so much wrong with it that it gives me a headache to read

ANYWAY - 206kw = 280hp

184bhp is about 134rwkw... so that sounds exactly right give or take a 10kw difference for dyno's etc

So realistically there is nothing devastating about it at all, its a factory car making pretty much exactly the factory HP/KW.

To be honest you need a full exhaust etc before a ECU/Tune... You wont get anywhere near the gains with JUST a ECU/Tune as you would if you put a decent flowing exhaust on there

don't be upset dude, as others have said. if the car is stock (completely) then thats RIGHT on the money on what your car should be making. Look at getting an exhaust and an EBC running around 10psi and you'll be making about 160rwkw maybe less depending on the dyno.

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right

<cut>

i was wondering what the next upgrade would be best to make more power out of my car.

First question, no, that's wrong.

Second question, there are threads on this, what exhaust system are your running? And are you running a decent cat converter?

Yes, people often go the ECU + more boost + exhaust system and either a pod filter or airbox panel filter upgrade + good tune and get a nice gain :D

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

yeah i thought it would put out more than what it did, last service was about a month ago

yeah here is dyno sheet

post-57941-1234052813_thumb.jpg

If a mechanic advised you to spend money on an ecu and boost controller, before exhaust and even a better quality air filter (in the airbox), you should go else where; It seems he is just interested in making the most money from you and doesn't care about your interests.

Fair enough he may have gotten confused about the power figures etc, but any good mechanic would recommend upgrading the factory exhaust system first.

guys, seriously now, a "non-happy dyno" on a stock car will go anywhere from 120-140rwkw depending on the health of the car and other factors. as al said too, you're mechanic is probably saying that to you to squeeze $$ out of you. oh dude your car is really low on power you need this this and this now to make it go hard.

first things first. get an exhaust, a cai, and maybe a hi-flow cat. you will notice a very nice gain alone just with those mods.

if your going to be boosting it id be putting a larger intercooler at the same time.....

also the r34 gtt is alittle heavier than the r33 gtst so the extra engine power is almost cancled out so not much differnece in actual real life power between stock r33 and stock r34...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To expand on this to help understanding... The bigger/longer the block is, the more it's going to work to sit on your far away high areas, and not touch the low stuff in the middle. When you throw the guide coat, and give it a quick go with a big block, guide coat will disappear in the high spots. If those high spots are in the correct position where the panel should be, stop sanding, and fill the low spots. However, using a small block, you "fall off" one of the high spots, and now your sanding the "side of the hill". Your little block would have been great for the stone chips, where you only use a very small amount of filler, so you're sanding and area let's say the size of a 5/10cent piece, with something that is 75*150. For the big panel, go bigger!   And now I'll go back to my "body work sucks, it takes too much patience, and I don't have it" PS, I thought your picture with coloured circles was an ultra sound... That's after my brain thought you were trying to make a dick and balls drawing...
    • Oh I probably didn't speak enough about the small sanding block for blocking large areas.  In the video about 3 minutes in, he talks about creating valleys in the panel. This is the issue with using a small sanding block for a large area, it's way too easy to create the valleys he is talking about. With a large block its much easier to create a nice flat surface.  Hard to explain but in practice you'll notice the difference straight away using the large block. 
    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
×
×
  • Create New...