Jump to content
SAU Community

Recommended Posts

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

Link to comment
https://www.sau.com.au/forums/topic/255972-devostating-dyno-results-for-r34/
Share on other sites

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

I wouldn't trust that site if my life depended on it.

1. The information was all ripped from these forums about 4 years ago.

2. Its out of date, never updated

The best info is always found by searching these forums, rather than some muppet who claimed limited info from these forums as his own.

IMO that site should be shut down as there is so much wrong with it that it gives me a headache to read

ANYWAY - 206kw = 280hp

184bhp is about 134rwkw... so that sounds exactly right give or take a 10kw difference for dyno's etc

So realistically there is nothing devastating about it at all, its a factory car making pretty much exactly the factory HP/KW.

To be honest you need a full exhaust etc before a ECU/Tune... You wont get anywhere near the gains with JUST a ECU/Tune as you would if you put a decent flowing exhaust on there

don't be upset dude, as others have said. if the car is stock (completely) then thats RIGHT on the money on what your car should be making. Look at getting an exhaust and an EBC running around 10psi and you'll be making about 160rwkw maybe less depending on the dyno.

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right

<cut>

i was wondering what the next upgrade would be best to make more power out of my car.

First question, no, that's wrong.

Second question, there are threads on this, what exhaust system are your running? And are you running a decent cat converter?

Yes, people often go the ECU + more boost + exhaust system and either a pod filter or airbox panel filter upgrade + good tune and get a nice gain :D

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

yeah i thought it would put out more than what it did, last service was about a month ago

yeah here is dyno sheet

post-57941-1234052813_thumb.jpg

If a mechanic advised you to spend money on an ecu and boost controller, before exhaust and even a better quality air filter (in the airbox), you should go else where; It seems he is just interested in making the most money from you and doesn't care about your interests.

Fair enough he may have gotten confused about the power figures etc, but any good mechanic would recommend upgrading the factory exhaust system first.

guys, seriously now, a "non-happy dyno" on a stock car will go anywhere from 120-140rwkw depending on the health of the car and other factors. as al said too, you're mechanic is probably saying that to you to squeeze $$ out of you. oh dude your car is really low on power you need this this and this now to make it go hard.

first things first. get an exhaust, a cai, and maybe a hi-flow cat. you will notice a very nice gain alone just with those mods.

if your going to be boosting it id be putting a larger intercooler at the same time.....

also the r34 gtt is alittle heavier than the r33 gtst so the extra engine power is almost cancled out so not much differnece in actual real life power between stock r33 and stock r34...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes to both! Yes to standard ECU and tune, but exhaust is aftermarket. Unsure on brand. Actually have it sitting in at my desk haha! I have to set it up on my laptop but this is a great next step, will do. So I generally try to shift before 4.5K RPM most times. I largely don't do a lot of high-rev driving, but I will take it up to red 1-2x a week max, as I know the occasional "Italian tune-up" is good for these cars.  Oh wow, is this way better than what I'm getting. Does this mean there's a good chance I have an issue?   Thanks for all the info so far guys.
    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
×
×
  • Create New...