Jump to content
SAU Community

R34 Turbo On Rb20...

Drakey

By Drakey,
in Engines & Forced Induction

 Share

Recommended Posts

Drakey Collaborator

Drakey

Posted
Posted

Hi all,

Just wondering for people who have a r34 turbo on a rb20, what psi are you running?

Currently im running 14psi, but have heard 16psi is safe as its on a smaller engine the turbo isnt spinning as hard?

Would be great if i could turn up to 16psi, but just want to make sure before trying it.

They are still ceramic exhaust wheel so im assuming they couldnt be pushed too hard...

Link to comment
https://www.sau.com.au/forums/topic/257167-r34-turbo-on-rb20/
Share on other sites
Rekin Grand Master

Rekin

Posted
Posted
im thinking it will spin the same when on full boost no matter what engine it is in.

i probably wouldnt push it

a larger displacement engine will produce more exhaust gasses.

Ive heard that because of this, the rb25 turbo on a rb20 can be dialed in to push more boost...

Although its all talk and wouldnt trust it unless someone can prove its safe.

QWK32 Veteran

QWK32

Posted
Posted

i ran a R33 series 2 turbo on my R32 for nearly 2 years at 14psi daily driven without a problem. the turbo was still in good condition when i removed it. i know this isn't a R34 turbo but its close (both have ceramic turbine and nylon compressor).

gotRICE? Veteran

gotRICE?

Posted
Posted (edited)

These Nissan turbos are scary!

One more note on the comment about the power difference between 14 and 16psi..

I had my R33 Dyno'd on saturday for AFR purposes, and there was also an R32 with RB25 there.

For all intensive purposes, the modifications bolt on wise are the same, FMIC, Turbo back exhaust etc etc, only difference is my stuff is bling (Blitz, HKS etc) and his is China. Oh and he had a pod, and im using the Airbox.

Both running stock RB25 turbos.

(IGNORE the peak as its an NZ dyno and ours seem to read higher, but for the purpose of the topic its relavant as the two cars were run 1 after another)

His car made 216RWKW @ 14psi and a mild tune with a Link ECU.

Mine made 211RWKW @ 10psi with Stock ECU. My AFR's were off the chart :s Stock ECU fail!

5kw , Extra 4psi and a tune? Seems like the turbos working a shitload harder for sweet FA gain?

The only good thing about his was the tune made the car pull like a schoolboy in the midrange. It was incredible compared to mine. But top end from 4500ish RPM and over it was exactly the same.

Alot to read :) But something to consider. The turbos are small, and have to work exrtemely hard to make 12psi+ boost.

Edited by gotRICE?
gotRICE? Veteran

gotRICE?

Posted
Posted
4psi extra for 5rwkw extra yes..

but you're forgetting that you have 0.5L more capacity and 0.5 extra compression too.

My comparison was between two RB25s if you didnt notice.

And i would have thought also that an extra 5psi on a smaller engine, with less compression would make even less difference would it not?

clip14 Rising Star

clip14

Posted
Posted

being able to run higher pressures on a smaller engine makes sense if the ceramic wheels fail because of excessive rpm.

since the engine is smaller (smaller volume to fill) the turbocharger can rotate at lower rpm to produce a certain pressure.

heat will probably also be an issue. running lean even at a known 'safe' psi can end in high exhaust gas temperatures and premature turbo exhaust wheel failure.

gotRICE? Veteran

gotRICE?

Posted
Posted
I dont think theyre comparable at all.

Considering one has stock ECU and the other has a Link. Having a/m ECUs isnt an automatic +. Who knows what the tune was like...couldve been rubbish..

Considering the Tune was done by Andre @ Speedtech, who has many many sub 10 second drag cars under his belt, im sure the tune was just fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan · Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan · Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...