Jump to content
SAU Community

Recommended Posts

Ghostrider, that bar you posted is the same as my car has I think

Same as this one? http://r30map.zive.net/~userjun/r30meeting...003/image76.jpg

This car is quite similar to what mine was like when it was imported... mine also had the HUGE wing, but no cage, and its white

I used to like the Ironmask front, but I think it looks silly from any angle except about 45 degrees. The MR30 style front can look tougher I think, but only if it's done right

Gonna go check if my bar is the same now

************

Yep, thats my bar. One piece glass.

Wouldnt mind seeing a pic of that bar with a standard front

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Ghostrider, that bar you posted is the same as my car has I think

Same as this one? http://r30map.zive.net/~userjun/r30meeting...003/image76.jpg

This car is quite similar to what mine was like when it was imported... mine also had the HUGE wing, but no cage, and its white

I used to like the Ironmask front, but I think it looks silly from any angle except about 45 degrees.  The MR30 style front can look tougher I think, but only if it's done right

Gonna go check if my bar is the same now

************

Yep, thats my bar.  One piece glass.

Wouldnt mind seeing a pic of that bar with a standard front

Adam,

What I'm playing with is:

1. stock lights with iron mask bonnet & cut down stock HR grille, fill in bottom space.

2. stock lights with cut down iron mask grille

3. same as above with either standard DR front spoiler/air dam

4. same as above with my front bar/air dam.

Will post the hashed results when completed. Thought I might sell my MR30 Hatch with iron mask lights, grille & standard bonnet, same as the jap guy. Would be diferent look for here.

Sorry guys,my bad.I was meaning that it had a 31 Blinker custom fitted to it,I know the 31's are in a different location stock. :D Of course it's not anyway,I forgot the later 30's had that style blinker. :slap: I was still thinking of the old "square" type.

HR31 flares are avaiable from R31 House,and there's spose to be some guys from "R31 Skyline club" getting copies made up here.

1984 Paul Newman HR30 4 SALE!

L20ET motor re-comditoned approx. 7000km ago

Triple hybrid turbo

Mild cam grind

3 inch exhaust and dump pipe

2litre Toyota supra intercooler, harness, boost controller and koni special front shockers. (Not Installed)

Very rare! Only 3 registered in Aus!

$5500 not neg.

1984 Paul Newman HR30 4 SALE!

L20ET motor re-comditoned approx. 7000km ago

Triple hybrid turbo

Mild cam grind

3 inch exhaust and dump pipe

2litre Toyota supra intercooler, harness, boost controller and koni special front shockers. (Not Installed)

Very rare! Only 3 registered in Aus!

$5500 not neg.

i gather this is your car and that amount is what your looking for!!or is this the add for that one for sale ages ago cause there are more than three people here with paul newman versions 2door anyway??

just got some updated pics.....i do have some engine ones but there too big so i'll have to get them smaller!! those rims will be resprayed black later as they look more gold than black at the moment!!

just looking through that website again and found this one, this is what i want mine to look like when she's finished, one day!! that is the kind of rear wing i want and a nice new front bar, something like the one ghostrider posted up resprayed would be great. looks like i'm a long way off!!

Hey guys I havint been on this forum for about 4 or 5 months and seem to have missed a bit. Far out this one big thread allright 850++ post and 30 pages wow. Anyway ive got a 1984 HR30 Skyline 4 door sedan which is now in the prosess of having a Mazda 13B Rotary engine :D (yes I know a very odd swap but very original) so far its had motor fitted to make the engine and gearbox X-members, its been paneled and repainted in a nice bright red with a silver pearl and plenty of sparkle, and the interior has been redone with a momo 320mm, new carpet, 2 black racetech bucket seats, black rear seats out of a f15a mitsi diamante, Autometer 5" Tacho/Oil pres/Water temp and fuel pres gauges the wheels are 17x8 ROH ZS's, just sent the motor away to get rebuilt and ported, rear disc end out of turbo model been fitted, now have to decide what im going to do with the suspension/breaks, (probably go with s13 fronts, with r32 gts-t 4 pot's and dont know with the rear yet) Just as long as it is fully sacked out hard!! and im waiting for my r200 lsd to be rebuilt so I can chuck it in, waiting on my turbo cosmo 5speed to arrive from japland also and my custom made 4 core alloy radiator and no dout I will find a few other bits and peices to do or rebuild as I go or get more cash. I will have the car on the road by september 25 (a while away but im in no hurry because thats when I get my licence back if I get it going any earlyer I will end up driving it and geting in trouble). Please dont be to harsh on me for my choice of powerplant for it :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...