Jump to content
SAU Community

Fast & Furious 4! Blacktown Drive-in

Bis-e Bee

By Bis-e Bee,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted

http://www.skylinesaustralia.com/forums/Fa...&hl=furious

I was just talking to Nick recently after seeing a topic post about a melbourne get together.

Anyway, someone has already beat me to it and it sounds like they are expecting a pretty big turnout of vehicles of all types.

Check the link, let's get some stag's together and represent!

Link to comment
https://www.sau.com.au/forums/topic/261755-fast-furious-4-blacktown-drive-in/
Share on other sites
Paramour Proficient

Paramour

Posted
Posted
http://www.skylinesaustralia.com/forums/Fa...&hl=furious

I was just talking to Nick recently after seeing a topic post about a melbourne get together.

Anyway, someone has already beat me to it and it sounds like they are expecting a pretty big turnout of vehicles of all types.

Check the link, let's get some stag's together and represent!

Advantage of a Wagon reverse it to the screen, open hatch layback and enjoy the movie. . in comfort. . . like the old days with Mum & Dad....

Bis-e Bee Mentor

Bis-e Bee

Posted
  • Author
Posted

Come on people!

I was thinking along Paramour's line of thought, open the hatch put the back seats down, pump up the sound system and get comfy!

Nick - hope you can make it man, I'm sick of going to things and being the only Stagea :D

zei20l - is that a yes I'm coming or no I don't associate with NS :(

As for the rest of you, get your ass into top gear and come see the movie!

Bis-e Bee Mentor

Bis-e Bee

Posted
  • Author
Posted

... or both :P

Plus there is a bevy of beauties in swimsuits and the likes.

We would be good if we could get a few stag's there, but if anyone doesn't like hanging with the crowd (i.e. Hard Tuned, Nissan Sylvia) etc. maybe we can arrange another occasion just for Skylines Australia?!

See what happens.

Space Goat Community Regular

Space Goat

Posted
Posted (edited)

the only problem is my radio is still jap spec with the shitty booster and its a bitch to find channels...

im kind of waiting for mum to sell her car so i can scam the bluetooth hu i got for her a while ago :)

Edited by Space Goat
Jetwreck Grand Master

Jetwreck

Posted
Posted
What happened?

Shed impellors?

What internals are you using or is it GCG?

Exhaust impeller fell off on the trip down to Phillip Island. Whats GCG? Was still drivable but 2T of cars with about 80HP is'nt fun.....was getting outdragged by fully laden B-Doubles

P.S. If this ever happens to you and you have a distance to travel make sure you drive through the gears using the Tiptronic. I found that my gearbox would start overheating(and I don't know why) if I left it in Drive.

iamhe77 Grand Master

iamhe77

Posted
Posted
Exhaust impeller fell off on the trip down to Phillip Island. Whats GCG? Was still drivable but 2T of cars with about 80HP is'nt fun.....was getting outdragged by fully laden B-Doubles

P.S. If this ever happens to you and you have a distance to travel make sure you drive through the gears using the Tiptronic. I found that my gearbox would start overheating(and I don't know why) if I left it in Drive.

GCG do bb HiFlows. They are near Sydney I believe.

This DID happen to me last year (around May I believe), I didn't use tiptronic and it didn't get hot although I had to drive for over an hour (lots of red lights and hills on the way). Turbo-less VQ25 should still be good for ~140kw.

Got some interesting looks due to the sound the turbo was making. Did sound quite amusing, though not funny at the time.

Any details on what the internals will be used for the rebuild?

I cannot get any details on mine. :down:

Jetwreck Grand Master

Jetwreck

Posted
Posted

I'm using Precision Turbo's in Wetherill Park.

I had to drive back from Phillip Island to Sydney....the gearbox spitting fluid happened at about hour 4. No noise from my turbo.....but the front end didn't spin that well either.

I will ask about the internals when I pick it up.....at this stage all I know is steel and Garrett BB's + housing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...