Jump to content
SAU Community

Recommended Posts

ok let me rephrase.

well maintained. how long do 6 cyl cars average? how long before turbo gives way? my r34 gtts at 115000km and its well maintained and never thrashed. wondering if i shud sell and go for an r33 with lower kms or just keep this until it dies out.

how longs a piece of string???

all depends on how they have been looked after and how much previous owners have abussed them

i couldnt agree any more

it depends.......

if a car has been submerged in water.....especially through flooding whilst transporting...the engine is GONE in a day!

The engine is pretty much like the clutch.....it depends on how you drive it.

it could last up to years...depending on how often it is driven........

but you could destroy a clutch in 1 day if you ride it all day long

An engine is an engine, regardless what it is.

Build quality, lubrication used, how the engine is driven, what power it is pushing out, how often it is serviced, climate, etc. You get my point.

A car can last 1,000,000km if it is treated correctly. However certain things might fail and need replacing. Most parts will have to be replaced during the life of the car, so what particular part are we talking about.

There really is no answer to this thread and therefore is entirely pointless.

Kind of like asking what age shall i live to.

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...