Jump to content
SAU Community

Recommended Posts

why would u bother slapping such a small turbo on a 25/30 build.

at least go gt30. ~300kw and full boost by 3000 which is amazing response.

Haha he actually means a 2530 turbocharger, not 3 litre with 25 head lol.

I wouldnt pissfart around with a 2860 with adaptors then maybe different lines (im not sure about the lines) Im pretty sure the dump pattern is different too. The adaptors are around $200 anyway, and would look shit. Theres 1100 already, plus custom dump, blah blah....

GO highflow. Looks stock, fits stock, least stuffing around, will make the power your are chasing. Theyre around $1300-1400 mark?

Haha he actually means a 2530 turbocharger, not 3 litre with 25 head lol.

I wouldnt pissfart around with a 2860 with adaptors then maybe different lines (im not sure about the lines) Im pretty sure the dump pattern is different too. The adaptors are around $200 anyway, and would look shit. Theres 1100 already, plus custom dump, blah blah....

GO highflow. Looks stock, fits stock, least stuffing around, will make the power your are chasing. Theyre around $1300-1400 mark?

Thanks for all the opinions!

I have been doing some homework since starting this thread and i now see how dumb it is to stuff around with T2 turbo etc etc etc.

i have since purchased a VG30DET single turbo (4V54) with the OP6 turbine housing which i intend to get highflowed to 450hp through Hypergear with the ATR28G3 CHRA as its the most bang for buck optiong i've come accross.

if you only want 220-230rwkw... i had a hypergear, that's been changed for another hypergear. G2 profile, 71 compressor wheel. It's was a special one-off that Stao made, it was mid 220'srwkw (with some other car issues) with stock turbo response. I reckon those specs in an OP6 rear will be exactly what you're after.

I've just switched to a G3, 76 compressor wheel with the OP6 rear housing, and i'm not expecting stock response at all, but hoping for 260'ish.

The first hypergear i had sounds like what you're after, but i think the G3/76 might be a bit big for what you want.

if you only want 220-230rwkw... i had a hypergear, that's been changed for another hypergear. G2 profile, 71 compressor wheel. It's was a special one-off that Stao made, it was mid 220'srwkw (with some other car issues) with stock turbo response. I reckon those specs in an OP6 rear will be exactly what you're after.

I've just switched to a G3, 76 compressor wheel with the OP6 rear housing, and i'm not expecting stock response at all, but hoping for 260'ish.

The first hypergear i had sounds like what you're after, but i think the G3/76 might be a bit big for what you want.

Yea i understand what your saying but i want the headroom for future mods such as injectors, AFM, ECU etc.

how you planning on tuning it at the moment?

i see where you're coming from, but i don't see the need to go so big when you only want 200-230rwkw. Why not get that figure in the most responsive way?

The coolest and quickest street car i have even been in was an R33 with Greddy inlet, baby 256 cams and a HKS 2530. The thing made boost and took off anywhere when you simply looked at the accelerator pedal. It was mighty torquey and punchy. It ran 18psi and made 230rwkws, though it drop back to 15psi up high in the rev range. There is no way i would say the turbo is too small. It hammered along very nicely

how you planning on tuning it at the moment?

i see where you're coming from, but i don't see the need to go so big when you only want 200-230rwkw. Why not get that figure in the most responsive way?

haha yea i forgot that i said i was only chasing that power figure.

But now i plan to have it tuned with the factory turbo after i get my new interdooler and boost controller which are on their way. From what i've seen i should make 180ish rwkw on a sensible tune.

Then I'm gonna save the cash to do the highflow, ECU, AFM, injectors, splitfire coilpacks all in one hit and aim for 240-250 rwkw

What exactly do you mean by baby cams? do you know what they were exactly?

Pretty much exactly how i want my street R33 to be like instant, torquey response

The coolest and quickest street car i have even been in was an R33 with Greddy inlet, baby 256 cams and a HKS 2530. The thing made boost and took off anywhere when you simply looked at the accelerator pedal. It was mighty torquey and punchy. It ran 18psi and made 230rwkws, though it drop back to 15psi up high in the rev range. There is no way i would say the turbo is too small. It hammered along very nicely
haha yea i forgot that i said i was only chasing that power figure.

But now i plan to have it tuned with the factory turbo after i get my new interdooler and boost controller which are on their way. From what i've seen i should make 180ish rwkw on a sensible tune.

Then I'm gonna save the cash to do the highflow, ECU, AFM, injectors, splitfire coilpacks all in one hit and aim for 240-250 rwkw

what are you getting tuned if you are running a factory ecu?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...