Jump to content
SAU Community

Recommended Posts

and I was on the way up to the petrol station. was on the road, going 50km/h, braked down to 30, entered roundabout, got halfway through, let go of accelerator, turned to go around and started to lose the back end, corrected twice and was back on the road. OMG HEARTATTACK.

apart from my driving errors, what should i look at to fix the traction problems? tyres obviously, hicas maybe? the thing should be serviced anyway at this point.

auto r34 gt

Link to comment
https://www.sau.com.au/forums/topic/265312-so-it-rained-today/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I have that happen in my R31, my R32 and my '85 Corolla. Its due to things that are more likely to make ur car drift.

Hard suspension is more likely to cause ur car to slide in the wet. Narrow or old brittle tyres will cause it to slip. Going into a round about to quick is enough, coz a quick left-right turn can cause it to slide. If the LSD is too tight it might lock too quick, and drift.

Be very careful in the wet dude. Its a death trap in the wet...

Yeah, was out driving in my R32 today. On paper, I should have been fine, billsteins, falkens, 4wd.

BUT even accelerating from stationary going right at about 30kmh i was getting all 4 wheels sliding... Greasy road's are deadly =\

Edited by Ten Four

when it hasn't rain in ages there is alot of oil built up on the road. so the road condition are generally poor.

It's not a traction problem, its driver error. Watch out for weight shifting, compression lock etc

everything is fine with your car

Edited by [Michael]

lift off over steer, top gear style lolz.

Tyre condition?

Fully sik spring rates?

I love the wet in the R...not too much correction required until...:) Got to watch the greasy roads in Perth, as Michael said we get a lot of oil build up

be careful overtaking in auto as well. when mine was auto i went to overtake a bus in the wet and it kicked back on me and you recon you had a heart attack. sideways pass a bus on the opposite side of the road = not good :)

nothing wrong with the car but driver error and if you can't correct that it's time to sell and buy a treddly

yep,

i've got a 31 with plenty of power, went for a bit of a drive today and had absolutely no issues with traction as i drove within the limits of myself, my car, and the roads.

Might pay to invest in a performance driving course at AHG. Just helps to get to know your car better and how to handle it in situations like these.

Could of just come on boost at an inconvienent time or there might of been oil on the road.

wOW! Someone dosent like traction :)

r34 are heavy the back end will come out no matter what in the wet just need to be careful

if it's heavy in the rear as you say it is harder to come out less weight makes the rear come out easy

Could of just come on boost at an inconvienent time or there might of been oil on the road.

My GQ wagon did same for first rain in a long time . 3rd gear doing 20ks and 1500rpm on roundabout n it kicks out ..first rains alway slippery shit i even came off my pushbike at lights yrs ago . Thank the oil n diesel leaking shit boxs of the world :D

Western Australian roads in the rain are dodgy as! I took my 33 out in the rain for the 1st time yesterday and it"ll kick out in 4th under boost in the rain! (with 275/30/19s!)

made the trip back from margaret river interesting haha.

anyway yea probably pay to take it easy in the rain till you build confidence. noone was born a good driver bro it just takes time behind the wheel :D

Western Australian roads in the rain are dodgy as! I took my 33 out in the rain for the 1st time yesterday and it"ll kick out in 4th under boost in the rain! (with 275/30/19s!)

made the trip back from margaret river interesting haha.

anyway yea probably pay to take it easy in the rain till you build confidence. noone was born a good driver bro it just takes time behind the wheel ;)

Seriously if you think that getting sideways in fourth on a wet road is testament to you driving ability you need to think again.

:D

Things to avoid are:

1. Driving like a dickhead.

2. Bragging about it on an internet forum.

This thread has made me see why people hate us in skylines... come on guys use common sense.

If your at the front of the lights there will be oil in the wheel lines (road indented).

try this:

1. move the car to the left or right of the lane to get off the oil.

2. park back a little from the lights so not to be right in it for your back tyres.

3. just nudge the car until the back wheels pass the white line and then give some gas.

o and obvious one is get better tyres or a problem i see a lot get your camber fixed so your whole tyre has contact with the road.

This thread has made me see why people hate us in skylines... come on guys use common sense.

If your at the front of the lights there will be oil in the wheel lines (road indented).

try this:

1. move the car to the left or right of the lane to get off the oil.

2. park back a little from the lights so not to be right in it for your back tyres.

3. just nudge the car until the back wheels pass the white line and then give some gas.

o and obvious one is get better tyres or a problem i see a lot get your camber fixed so your whole tyre has contact with the road.

LOL park back from lights :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...