Jump to content
SAU Community

Recommended Posts

and I was on the way up to the petrol station. was on the road, going 50km/h, braked down to 30, entered roundabout, got halfway through, let go of accelerator, turned to go around and started to lose the back end, corrected twice and was back on the road. OMG HEARTATTACK.

apart from my driving errors, what should i look at to fix the traction problems? tyres obviously, hicas maybe? the thing should be serviced anyway at this point.

auto r34 gt

Link to comment
https://www.sau.com.au/forums/topic/265312-so-it-rained-today/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I have that happen in my R31, my R32 and my '85 Corolla. Its due to things that are more likely to make ur car drift.

Hard suspension is more likely to cause ur car to slide in the wet. Narrow or old brittle tyres will cause it to slip. Going into a round about to quick is enough, coz a quick left-right turn can cause it to slide. If the LSD is too tight it might lock too quick, and drift.

Be very careful in the wet dude. Its a death trap in the wet...

Yeah, was out driving in my R32 today. On paper, I should have been fine, billsteins, falkens, 4wd.

BUT even accelerating from stationary going right at about 30kmh i was getting all 4 wheels sliding... Greasy road's are deadly =\

Edited by Ten Four

when it hasn't rain in ages there is alot of oil built up on the road. so the road condition are generally poor.

It's not a traction problem, its driver error. Watch out for weight shifting, compression lock etc

everything is fine with your car

Edited by [Michael]

lift off over steer, top gear style lolz.

Tyre condition?

Fully sik spring rates?

I love the wet in the R...not too much correction required until...:) Got to watch the greasy roads in Perth, as Michael said we get a lot of oil build up

be careful overtaking in auto as well. when mine was auto i went to overtake a bus in the wet and it kicked back on me and you recon you had a heart attack. sideways pass a bus on the opposite side of the road = not good :)

nothing wrong with the car but driver error and if you can't correct that it's time to sell and buy a treddly

yep,

i've got a 31 with plenty of power, went for a bit of a drive today and had absolutely no issues with traction as i drove within the limits of myself, my car, and the roads.

Might pay to invest in a performance driving course at AHG. Just helps to get to know your car better and how to handle it in situations like these.

Could of just come on boost at an inconvienent time or there might of been oil on the road.

wOW! Someone dosent like traction :)

r34 are heavy the back end will come out no matter what in the wet just need to be careful

if it's heavy in the rear as you say it is harder to come out less weight makes the rear come out easy

Could of just come on boost at an inconvienent time or there might of been oil on the road.

My GQ wagon did same for first rain in a long time . 3rd gear doing 20ks and 1500rpm on roundabout n it kicks out ..first rains alway slippery shit i even came off my pushbike at lights yrs ago . Thank the oil n diesel leaking shit boxs of the world :D

Western Australian roads in the rain are dodgy as! I took my 33 out in the rain for the 1st time yesterday and it"ll kick out in 4th under boost in the rain! (with 275/30/19s!)

made the trip back from margaret river interesting haha.

anyway yea probably pay to take it easy in the rain till you build confidence. noone was born a good driver bro it just takes time behind the wheel :D

Western Australian roads in the rain are dodgy as! I took my 33 out in the rain for the 1st time yesterday and it"ll kick out in 4th under boost in the rain! (with 275/30/19s!)

made the trip back from margaret river interesting haha.

anyway yea probably pay to take it easy in the rain till you build confidence. noone was born a good driver bro it just takes time behind the wheel ;)

Seriously if you think that getting sideways in fourth on a wet road is testament to you driving ability you need to think again.

:D

Things to avoid are:

1. Driving like a dickhead.

2. Bragging about it on an internet forum.

This thread has made me see why people hate us in skylines... come on guys use common sense.

If your at the front of the lights there will be oil in the wheel lines (road indented).

try this:

1. move the car to the left or right of the lane to get off the oil.

2. park back a little from the lights so not to be right in it for your back tyres.

3. just nudge the car until the back wheels pass the white line and then give some gas.

o and obvious one is get better tyres or a problem i see a lot get your camber fixed so your whole tyre has contact with the road.

This thread has made me see why people hate us in skylines... come on guys use common sense.

If your at the front of the lights there will be oil in the wheel lines (road indented).

try this:

1. move the car to the left or right of the lane to get off the oil.

2. park back a little from the lights so not to be right in it for your back tyres.

3. just nudge the car until the back wheels pass the white line and then give some gas.

o and obvious one is get better tyres or a problem i see a lot get your camber fixed so your whole tyre has contact with the road.

LOL park back from lights :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...