Jump to content
SAU Community

Recommended Posts

if i spending that lil extra money increases the life of my lisence then im all for it,turbo ill have that blow of sound, supercharger wont,and a sc14 is only a small toyota supercharger.

it wont be a 'lil extra' you'll need brackets, pipework, etc all custom fabricated

then depending on how much power you want to make, injectors, afm, ecu/tune, etc etc...

what is this great idea you have of hiding the SC? so far it seems like hopes and dreams without any real actual thought put to it.

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

i enjoy driving with abit of an angle,thats my hobby so if spending a lil extra $$$ on making my car that little bit easyer to drive sideways then im more then happy to do it and take the risk's,i just want info on it before i go and "waiste" my money.

it can be done, but I'm not sure how in a stealth way... I guess whatever info you can gleam off this:

SV100532.jpg

Turbo_dSupercharged_Skyline.jpg

There's a bloke in VIC who runs a twin scroll on his RB25DE. The SC14's a great little supercharger, I ran it on a 3SGTE on one of my previous cars with some custom piping, belts and pulleys.

I still say just turbo it and hope for the best, run a hidden recirc valve instead of an atmo BOV etc.

everyne has there own opinion

yes iknow that turboing is easier and cheaper, but im not one to follow the flock of sheep down that path..........

i'm all for being different, but there is also common sense to... $30k on a super charged setup will get you an equal/better turbo setup, plus probably a fair few other things including brakes and the like (which shouldn't be skimped on either)

flock of sheep? 90% of those with turbo skylines got it like that from the factory...

i guess i'll stick to be a sheep with a 400hp RB25DET in a passage GT, everyone has those.

it can be done, but I'm not sure how in a stealth way... I guess whatever info you can gleam off this:

SV100532.jpg

Turbo_dSupercharged_Skyline.jpg

There's a bloke in VIC who runs a twin scroll on his RB25DE. The SC14's a great little supercharger, I ran it on a 3SGTE on one of my previous cars with some custom piping, belts and pulleys.

I still say just turbo it and hope for the best, run a hidden recirc valve instead of an atmo BOV etc.

thanks for the pic,making it stealthy is going to be hard but not impossible,trial and error i guess.

if i spending that lil extra money increases the life of my lisence then im all for it,turbo ill have that blow of sound, supercharger wont,and a sc14 is only a small toyota supercharger.

I don't mean to weigh in here, but maybe you need to do a little research before you go down that road. Firstly, as said before SC's do make sound, and then some (SC make a pronounced whining noise all the time, not very stealthy now is it?) and Turbos don't always make BOV noses either, only ones with externally venting BOV and Wastegates do - proper (stock) ones dump the excess air back into the intake line quietly (with the added benfit of not running rich too).

SC's have BOV's as well, in all likelihood it's not the turbo or SC the police will notice, it's the huge exhaust, intercooler and fact that a p-plater has a skyline that will attract attention. After that they'll go over it with a fine toothed comb. I got stopped by TMU (highway patrol) at my parents town once, and interrogated by the roadside over burnouts and drag racing, while they pulled apart my car (despite the fact that I haven't lived in the place for 2 years) purely because someone with a similar car rolls about town.

STOP! Opinion time!

There is no reason a supercharged RB25DE stroker won't make decent power levels running a vortech style blower. The only thing i would be concerned about is the amount of crank energy required to turn that supercharger. This is keeping in mind that at a similar output the supercharged mercedes SLK V10 (I think) needs well over three hundred horsepower just to turn the supercharger to produce six hundred ish.

The hotrod sitting in my fathers shed with a roots style blower has a 440 big block and has been built by a mechanical engineer and a bloke that builds race engines (who happens to also be the cars owner - go figure). Its streetable (just) and is often taken on cruises. That makes about 660 HP (perhaps more now it has been rebuilt a bit stronger) and more torque than you could imagine.

To bring things into perspective the best CAPA supercharging kit for a L-98 or LS3 produces around 500kW (670HP) and thats with a massive cubic capacity advantage.

In terms of dollars per HP I can't imagine its a wise investment.

30,000 + purchase cost of N/A R34 (I assume around 15,000) / 750 = $60 per HP.

With half that money you could build a killer RB30/25 at around $30 per HP while retaining the same peak power and most likely similar power/torque curves.

Fair enough do something different and pave the way for others. I agree its an exciting concept. I want to see the pictures when its done, perhaps even come along to an autosalon event and see it in person. However there are a multitude of problems to overcome in theory let alone in practice.

Supercharging can net the same result as turbocharging, but turbocharging is cheaper and better established because most skylines were turbo'd from stock. Thats the end of the story.

Back to the dude wanting an SC14 on that RB25DE - don't bother a) its too much hassle for too little gain b) you will be caught and fined. No you can't hide a supercharger, not even if you were McGuyver.

*nicks some popcorn and takes a seat*

Edited by R33_Dude
STOP! Opinion time!

There is no reason a supercharged RB25DE stroker won't make decent power levels running a vortech style blower. The only thing i would be concerned about is the amount of crank energy required to turn that supercharger. This is keeping in mind that at a similar output the supercharged mercedes SLK V10 (I think) needs well over three hundred horsepower just to turn the supercharger to produce six hundred ish.

The hotrod sitting in my fathers shed with a roots style blower has a 440 big block and has been built by a mechanical engineer and a bloke that builds race engines (who happens to also be the cars owner - go figure). Its streetable (just) and is often taken on cruises. That makes about 660 HP (perhaps more now it has been rebuilt a bit stronger) and more torque than you could imagine.

To bring things into perspective the best CAPA supercharging kit for a L-98 or LS3 produces around 500kW (670HP) and thats with a massive cubic capacity advantage.

In terms of dollars per HP I can't imagine its a wise investment.

30,000 + purchase cost of N/A R34 (I assume around 15,000) / 750 = $60 per HP.

With half that money you could build a killer RB30/25 at around $30 per HP while retaining the same peak power and most likely similar power/torque curves.

Fair enough do something different and pave the way for others. I agree its an exciting concept. I want to see the pictures when its done, perhaps even come along to an autosalon event and see it in person. However there are a multitude of problems to overcome in theory let alone in practice.

Supercharging can net the same result as turbocharging, but turbocharging is cheaper and better established because most skylines were turbo'd from stock. Thats the end of the story.

Back to the dude wanting an SC14 on that RB25DE - don't bother a) its too much hassle for too little gain b) you will be caught and fined. No you can't hide a supercharger, not even if you were McGuyver.

*nicks some popcorn and takes a seat*

you know, i was just about to say that......lolz very good post!

I admire the superchaged route, im glad the bloke got a 'few' good posts of information so he can make his decision

ok so if i don supercharge and dont turbocharge then how do i get the extra hp for the same price?,i need just that little extra bit of power,guess i could put smaller wheels on the back but id prefer more power haha

You buy a GTR when you're off P's

Simple.

Ahhh kids.

Am i the only one that finds this topic ridiculously hilarious?

Here's my suggestion:

-Keep your R34 as is.

-Follow the rules

Your talk of a stealth supercharger will simply not work (For cheap + in order to fool a half decent cop + everything else that needs to be done to the car to get your setup working).

Upgrade when you are off your P's. This is exactly what i did and it gave me something to look forward to.

You cannot get away with anything these days. As other people have mentioned. Cops have it in for imports, more so skylines + p platers.

I have a p plater friend with a bog stock r33 gts4 (non-turbo) that has been pulled over multiple times in a week. Not to mention the problems i had (Full license + R34 GT-T)

Save your money, drive safe, best advice i can give you :-)

Edited by lukebaldan
i dont want all the wheels to spin just the back ones :D ,and i dont want to give up something i love doing just because the police dont want me to.

you're a retard.

keep your shit off the street before you hurt someone.

i dont want all the wheels to spin just the back ones :D ,and i dont want to give up something i love doing just because the police dont want me to.

Once you loose your license for going against the laws... Post up.

It'll be good to hear how suddenly you respect the law :P

Once you loose your license for going against the laws... Post up.

It'll be good to hear how suddenly you respect the law :P

Agreed, R31Nismoids accounts of his run ins with the law and disputes with the constabulary's point of view made for entertaining reading in the past years.

He's the law's bitch these days :D

ok so if i don supercharge and dont turbocharge then how do i get the extra hp for the same price?,i need just that little extra bit of power,guess i could put smaller wheels on the back but id prefer more power haha

Work the fark out of the engine dude.... head work, cams...injectors...cold air intake...exhaust/extractors etc etc....You need force induction to get power...you need force induction to get better power. An NA will perform better in some areas then a turboed car.

You buy a GTR when you're off P's

Simple.

Don't be ghey.

i dont want all the wheels to spin just the back ones :D ,and i dont want to give up something i love doing just because the police dont want me to.

Dude....thats just wrong seriously.

As for super charging and spending all that money...why not just twin charge it......smaller super charger and big turbo...she'll be sweet then...and you can spend 30k easily. Just an idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...