Jump to content
SAU Community

Recommended Posts

Hi all, just put some mods on my 1990 32GTR recently with 123ks. So far, I have installed:

  • Vipec ecu running 13psi
  • Blitz pod air filters
  • 3 inch catback exhaust
  • HKS adjustable cam gears
  • sard 700cc injectors
  • bosh 044 fuel pump
  • turbosmart fuel reg
  • nismo fmic
  • vipec boost controller

Everything else stock.

had the car dynoed on shell optimax and it only managed to get 192 awkw. This seems prety low to me with the level of mods i have compared to other owners of GTR's with less mods. Is there something wrong with my motor or is this figure about right? Thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/267688-gtr32-power-level/
Share on other sites

There is a whole thread dedicated to RB26 dyno results - a LOT with stock turbos.

Have a look through, you'll soon see what you should be getting with 2-3 pages.

thanks, I looked on the forums, and people are running more power than me with less mods. Maybe the engine is just tired and need a freshen up.

Yeh, my car got 50kw's more in rw mode than in aw mode on the same dyno lol, some dyno's allow for the awkw mode and will read like rw dyno's and some have no correction and will just read the power output at all fours.. Also some will read higher than others because the tuners like them reading that way

That's the shiet thing, some peoples stated awd are actually just adjusted to read like rwd figures, at autosalon for example

I've always wondered about the power loss.. 50kw's seems alot to lose just to the front wheels being on? How can some legitimate tuners get readings on awd dyno's that are only a few kw's different from the same car in rwd on the same dyno

Edited by GTAAAH

I dont understand why you have done what youve done to the fuel system! For standard turbos! You dont need it. Plain and simple.

For the money youve spent on the fuel system you could have bought a second hand set of hi-flows and made ~270kw.

Forget about changing the dumps, thats stupid, might as well change turbos at the same time if youre going to do that.

Yes do a front pipe and check the cat. Or go de-cat. (Best)

P.S 13psi is scary for 19 year old turbos.

I dont understand why you have done what youve done to the fuel system! For standard turbos! You dont need it. Plain and simple.

P.S 13psi is scary for 19 year old turbos.

+1 and +1.

Standard fuel system is ok for up to ~280kw (tho fuel pumps get tired so it is probably worth replacing that)

I just blow one of my turbos at 13psi. Conservative tune, 120,000kms. (FWIW they're supposed to be replaced every 100,000kms).

ask your tuner about it. what did he say? do a power run in RWD and see if it makes you feel better. and as above, for up to 280rwkw you can use standard injectors, standard reg and standard pump (providing it's healthy).

I dont understand why you have done what youve done to the fuel system! For standard turbos! You dont need it. Plain and simple.

For the money youve spent on the fuel system you could have bought a second hand set of hi-flows and made ~270kw.

Forget about changing the dumps, thats stupid, might as well change turbos at the same time if youre going to do that.

Yes do a front pipe and check the cat. Or go de-cat. (Best)

P.S 13psi is scary for 19 year old turbos.

Yeah thanks for the advice, I'll get the front pipe and cat checked. I guess I should have asked for advice before I started tuning my car. Learning the hard way :P . I bought the GTR off one of my workmates to resell but decided to keep it instead. When he had the car, he upgraded to 3" catback exhaust. was going to change the front pipe and cat, but my mechanic said that they will be fine cause they are aftermarket. He also did Pod filters, VIPEC ECU tuned running 12psi. The car had a power output of 189awkw. So basically I made 3awkw with the added mods :cool: . Better than nothing I guess

ask your tuner about it. what did he say? do a power run in RWD and see if it makes you feel better. and as above, for up to 280rwkw you can use standard injectors, standard reg and standard pump (providing it's healthy).

I asked my mechanic about the power output, he said that 258awhp aka 192awkws is quite normal for a car running standard turbos. Well thats a bit of the reason why I changed them as well just to be on the safe side cause the system is getting quite old now. nearly 19 years old. But Im not too sure if they have been changed in the past.

+1 and +1.

Standard fuel system is ok for up to ~280kw (tho fuel pumps get tired so it is probably worth replacing that)

I just blow one of my turbos at 13psi. Conservative tune, 120,000kms. (FWIW they're supposed to be replaced every 100,000kms).

sorry to hear that your turbo blew. what a bummer. I just hope that my turbos hold up for a little while longer

Im just running the stock turbos. I think Mark was going to run them at 14psi, but decided to run them at 13psi instead

Agreed with Femno's comments, spend money on turbo's and dumps next.

FYI i had 15psi, 262rwkw/236awkw

Yeah thanks for the advice, I'll get the front pipe and cat checked. I guess I should have asked for advice before I started tuning my car. Learning the hard way :P . I bought the GTR off one of my workmates to resell but decided to keep it instead. When he had the car, he upgraded to 3" catback exhaust. was going to change the front pipe and cat, but my mechanic said that they will be fine cause they are aftermarket. He also did Pod filters, VIPEC ECU tuned running 12psi. The car had a power output of 189awkw. So basically I made 3awkw with the added mods :cool: . Better than nothing I guess

Car was tuned on same dyno by the way.

Agreed with Femno's comments, spend money on turbo's and dumps next.

FYI i had 15psi, 262rwkw/236awkw

Was that on aftermarket turbos?? I have purchased some second hand rebuilt GTR33 steel wheeled ballbearing turbos. Just waiting on them to arrive, Its been 5 weeks and still waiting.

Was that on aftermarket turbos?? I have purchased some second hand rebuilt GTR33 steel wheeled ballbearing turbos. Just waiting on them to arrive, Its been 5 weeks and still waiting.

Stockers. Other mods (minimal) are in the thread R31Nismoid linked you to.

Turbos's dont take 5 weeks for delivery from within Australia. Contact the seller, get a tracking number

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...