Jump to content
SAU Community

Recommended Posts

Hey Guys (and gals!)

just thought id sing some praise for the place that did my dump pipe for me. Everyone was etelling me i was lookn at $400 to get a nice 3 inch dumpie made up (just the short one). Had a few suggestions, but eventuall rang Morley Quick Fit zorst and got quoted $160 (i was thinkin "yeh right, u quote $160 then hike up bbill afterwards), but go in there and drop car off, come back in arvo and sure enough $160 (3" mild steel mandrel fitted and all). Boost jumped from 7psi max to 10psi now. I dont know bout u guyz but $160 for a fitted 3" dumpie is cheap as.

I am in no way advertising them but simply suggesting them as I have been burnt in the past and its good to know where u can go to get stuff done cheap.

ps anyone with a r33 stock turbo for sale drop me a pm as im now on a power trip

Link to comment
https://www.sau.com.au/forums/topic/26778-dump-pipe-referral/
Share on other sites

yeah alot of guys get the split and the difference is negligable

i think it depends on mods as well

anyways yeah they get a steady stream of skylines, i refer everyone to them and also for fitting exhausts they charge like $40

fantastic

next line is going there for a dump pipe and a cat removal

for testing purposes obviously

i can do nothing but recomend the guys at quickfit for cheap exhaust deals..

ive been getting them to do bits for me for ages, on my first rex a 3" zorst from the cat back was $200 including a hi flow muffler, and the second rex a 3" straight through pipe from the first join after dump pipe was a massive $80..

and the work is good, fast cheap..

Like my note ses, they are cheap as and Pat there is a champ, had to wait a little to get mine fitted in for an appointment but was well worth the wait, they were fitting a black 33 with front mount and cooler spray whilst i was picking up mine, ive heard they are good for cooler piping too, im definetely paying them another visit to get my cooler piping, i would recommend using them to anyone

will find their number / address next post

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...