Jump to content
SAU Community

Recommended Posts

hi I have a 89 r32 gtr.

Like it says in the tittle i am chassing around 300 to 350 kw at the wheels. I have 2860r-5 turbos and wanted a descent fuel set up to support them. I have just purchased sard 800cc injectors and was wondering what fuel pump to use. At this satge I don't really want to make/ buy a surge tank but i am more after a good intank fuel pump. I have being doing a bit of research, though it has all conflicted each other.

What are the Bosch 040 good for or a 044 mounted in the tank (hp/kw wise) Or can somebody give me another option. I don't want the pump to be maxed out at the kw I am chasing

Cheers

Thanks to all the people who have replied to this.

Is the Bosch 040 good for 600hp or 400hp? I don't want the pump to be maxing out at around 350kw. Is any body using the 040 in a gtr with similar power figures to what I am chasing?

Cheers

according to the specs (4.7L/m) that nismo state for the gtr pump it will out flow a 044 but what it doesn't say is if that is free flow or with pressure.

i just put a 044 intank (R33) and you can barely tell the difference noise wise between it and the stock pump, i used 3 pieces of 25mm fuel resistant PVC tubing opened up and wrapped around the pump and the arm it mounts too.

post-32350-1241955462_thumb.jpgpost-32350-1241955475_thumb.jpg

will nismo in tank support 380awkw?

Put it this way. Twin RS's at anything up to 2 bar on a 2.8 litre stroker and im fine (Fuel pressure gauge in cabin to confirm). Your turbo's are smaller so you will be sweet!

yep, no question, nismo pump is the easy winner. it mounts properly in the stock cradle too which is a problem with other pumps. if they are not mounted correctly the pick-up can be too high resulting in fuel starvation. and the nismo pumps are 276 litres per hour, rated at 3bar (ie stock base pressure).

  • 2 weeks later...
yep, no question, nismo pump is the easy winner. it mounts properly in the stock cradle too which is a problem with other pumps. if they are not mounted correctly the pick-up can be too high resulting in fuel starvation. and the nismo pumps are 276 litres per hour, rated at 3bar (ie stock base pressure).

hmm deff sound like the best in tank option for no dicking around, need to source one now...

i got a bucket of dead walbros... want some spares.....

And my walbro is relagated to lift pump duties upto my surge/044 setup as it couldnt maintain flow above ~50psi rail pressure.

I'd be interested to know what setup a Walbro makes 380awkw with :cheers:

Snowman was/is using a stock R34 GTR pump for 380rwkw, so anything aftermarket is gonig to meet that easily enough

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...