Jump to content
SAU Community

Recommended Posts

Looks like you enjoyed the last session better, whats with the engine cutout switch? And lol at the guard coming off :)

They called it the inertia switch. Essentially it was a little shock switch which meant if you hit a wall it kills the fuel pump so that you dont catch alight, it was pretty sensitive so also meant that if you used a bt too much kerb then it also stopped the fuel pump. They had fines for hitting the rev limiter, going into the sand traps etc etc. I suppose hitting kerbs isnt great for the cr, Snowie and guard case in point :ermm: So i think its there so help remind people to have fun and dont go pushing too hard.

  • 2 weeks later...
  • 3 weeks later...
Hahaha, see, now that's why I rate you Roy! :P

I've uploaded some more vids from Tugga Taz, purely to get my channel views up you understand :P Not for self gratification at all :D

I miss Tassie!

Crash -

Cheers!

Great footage there Marlin!

How much damage did you do to the car when you went thru the fence? any Pics?

Nice driving!

Ash

thought you might like a few from pommie land

first clip, castle combe curcuit, open pitlane trackday

second clip. again open pit lane cadwell park curcuit

and finally anglesey curcuit/wales// gental first lap to get some heat in the tyres.

cars a 33gtr, rb26/30 gt4094r turbo on low boost 1 bar,

bernie.uk

Edited by rockabilly
Great footage there Marlin!

How much damage did you do to the car when you went thru the fence? any Pics?

Nice driving!

Ash

Thanks Ash, mainly cosmetic damage mate.

A headlight, indicators, front bar, roughed up the 'cooler, needed full respray, some gaurd bendage, lucky we had a good strong bash plate I think, it took a hell of a hit, a and likely saved some major damage.

Here's the first corner agter we rejoined the road :D

9TT6332.jpg

Thanks Ash, mainly cosmetic damage mate.

A headlight, indicators, front bar, roughed up the 'cooler, needed full respray, some gaurd bendage, lucky we had a good strong bash plate I think, it took a hell of a hit, a and likely saved some major damage.

Here's the first corner agter we rejoined the road :whistling:

9TT6332.jpg

Thanks for putting up the pic.

Like you say it could have been worse!

What about the farmers fence, who pays for that?

Ash

The competitor pays for the fence (Targa has contractors poised to react to avoid farmers getting too pissed), but this time I hear the farmer was watching us carve his fences and paddock with the other spectators, and was having a good laugh, and fixed it himself. So I hear.....

not that simple pete, and probably not the right thread. gtst and gtr are in different categories in aasa regs. gtst has more freedoms. as of about 2 weeks ago I could not find the current AASA tarmac rally regs anywhere on the web (i was checking for buller sprint).

for gtr it is basically ecu and suspension free. zorst 3". boost free. standard motor (no deep sump, no cams, std turbo but may be n1 spec).

Here is some great IPRAWA footage from multiple cars

2 big crashes in this one

ASH

great footage/production there, since so many cars have cameras these day I'm surprised more people haven't done this sort of video. good work

A couple from Lakeside using a fancy new camera; Captain Smooth here lolol

I notice the mighty rb20 doesn't make enough power to register lateral g under acceleration. I bet the camera is worth more than the car too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...