Jump to content
SAU Community

Recommended Posts

I have finally managed to track one of these real Gt3076R's down 700382-12 or 700382-5012

For peoples reference

GCG $2195 available around the 9th June

MTQ qld $2066 available around August

Slide $1775 in stock but is not the anti surge compressor inlet. (Not the real gt3076)

Capa $1375 with no rear housing. No stock.

Rear IW .82 housing ATP delivered $620 or Garret Aust for $680-780

Another Brisbane supplier who I have order thru. Getting assemble tomorrow $1800

Once they have supplied me the correct turbo I will let you know who they are.

They have great pricing online compared to others.

All plus actuator and bracket $150-180.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

How confusing.

Is it worth kicking up a stink for the correct spec 3076 with port shrouded cover? Or not worth my trouble?

Check out ATPturbo.com home page , scroll right down and look at the GT3076R-WG

0.70 comp 52 Trim 0.86 rear

You may have this configuration, sounds like a pretty damn good street turbo. Quick spool 500 hp .

Check out ATPturbo.com home page , scroll right down and look at the GT3076R-WG

0.70 comp 52 Trim 0.86 rear

You may have this configuration, sounds like a pretty damn good street turbo. Quick spool 500 hp .

That one looks like it has the T2 rear.

fkn confusing shit!

That looks like it though, except I don't have that rear housing...

GT3076R-WG_top.jpg

I have this rear housing

internally_wastegated.jpg

It seems to me the only differences are the 7 T04S blades instead of the 6, and no ported front...

Also, ID tag says 700177-5018

And a simple Google search of "Garrett 700177-5018" lead to this link http://www.turbofast.com.au/GTseries.html which indicates it is a GT30 family turbocharger that uses a TO4S compressor (7 blades). That makes it a GT3076R

There's really no science to those searches and you'd have found out long ago what your specs actually are.

All that aside, do you actually have it fitted and running, and if so what do you think about it? Those specs support same/similar flow capacity as the 6 bladed GT3037R so I'm interested to hear how it goes in service.

Hi people. Just a question to all you guys that have done this upgrade. What is generally used on the intake side of things as far as connecting the standard pipe to the turbo. Is some sort of fabrication required or is there an actual correct size intake pipe that can be purchased. Im asking because i've generally not seen it mentioned when people post about these upgrades. All the people i've asked dont know? If there is a correct pipe for this application where should i purchase from and rough estimations on price would be very helpful. Thank's guy's ;)

Regardless of what specs state the T04S 7 blade GT3076r is a crappy thing. The -12 is what you want; if you can't then its either the 3071r or the 3082r.

The GT3071's tend to make power easier than them. :S

Edited by SLAPS
And a simple Google search of "Garrett 700177-5018" lead to this link http://www.turbofast.com.au/GTseries.html which indicates it is a GT30 family turbocharger that uses a TO4S compressor (7 blades). That makes it a GT3076R

There's really no science to those searches and you'd have found out long ago what your specs actually are.

All that aside, do you actually have it fitted and running, and if so what do you think about it? Those specs support same/similar flow capacity as the 6 bladed GT3037R so I'm interested to hear how it goes in service.

Yeah me too Doof..

It seems, within the posts, heaps of blokes didn't and still don't even know if they have the TO4S Comp cover and 7 blade wheel instead of the genuine Garrett GT3076R.

Hey, if it's a good package, then tell us.

Please , post your results ASAP, we gotta keep this thread alive, and kicking.

If you ask me, spending $2K plus on a turbo, and getting something else, it's a blatent rip off.

Imagine if you walked into Hugo Boss for a leather jacket and found out it was made in Bali.

Same thing here man.

  • 1 month later...

This is a good example of why Garrets and HKS's turbo description systems fall down , the figures given are not always exacting probably in the interests of simplicity .

Specific to the GT3037 and GT3076R turbo group .

Firstly to HKS , in long figure form it probably should have been called GT30GT37 because what they mean is a GT30 turbine with a GT37 compressor , the only real differences in the HKS marketed GT3037's is the compressor trim and since they are all GT37 compressors the same handle applies .

The Garrett system is slightly different because their terminology - GT3076R - means GT30 turbine with 76mm OD compressor .

If all they used was "76"mm OD GT37 compressor wheels there wouldn't be a problem but they don't do they ...

For reasons known best to themselves they market "GT3076R's" with an earlier tech T series compressor - the one with the higher blade count ie 7/7 rather than 6/6 . Full height blades/splitter blades .

What it comes down to in the end is the part numbers on the turbos ID tag . Mostly but not always they have a cartridge or CHRA number and for a GT30 turbine based ball bearing one it will be 700177 series . The prefix or dash (- xxxx) after the 700177 tells you precisely the compressor wheel options and any mods to the turbine itself ie cropping or grinding down from 60mm to 56.6 .

700177-7 or -5007 is the CHRA number for the real or all GT wheel spec GT3037/GT3076R in 56 comp trim .

Basically if it doesn't say -5 or -6 or -7 (5005 5006 5007) it hasn't got the GT37 compressor on it .

If you wants what I call the real GT3037 or GT3076R then it has to have a GT series compressor to be a matching set with the GT series turbine .

I look at it like this , GT compressor for GT turbine and T series compressor for T series turbine . Left shoe for left foot and so on .

At the end of the day the only thing that's significantly different between a GT3037S 56T and a real GT3076R is the turbine housing , a HKS one on the 3037 and a Garrett one on the 3076R .

True the HKS has the bell mouthed insert in the comp cover but I think that's of little consequence unless you are running these turbos to the absolute limit and getting every last 1% out of them - with the largest proper respective turbine housing available .

Cheers A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...