Jump to content
SAU Community

Damaged Crank - Part Of My Rb26 Track Car Rebuild

wrxkilla
 Share

Recommended Posts

wrxkilla Mentor

wrxkilla

Posted
  • Author
Posted

yeah its out being rebuilt now. And after finding this, I am pretty unhappy. I need a new crank.

This happened about a year ago (and car has run since) when I had Mercury Motorsport do some other work including replace the balancer with an ATi item. If I recall they had some probs getting the balancer off and had to use some force...

My oil pump has just died, so motor is now in peices and this is what I find. I personally would have preffered to know at the time the extent and would have replaced the crank!

Am I unreasonable?

Merli Grand Master

Merli

Posted
Posted
what did they use the change the balancer, a ice pick?

or a crowbar...

That's easily fixed though. A bit of bog and a lick of paint, and she'll be as good as new! :(

Beer Baron Grand Master

Beer Baron

Posted
Posted

very similar thing happend to me mate. simple timing belt change at a well known and well trusted workshop resulted in my balancer eventually coming loose. lucky the crank snout was easily repairable and engine does not need. and also lucky my balancer came loose 200 meters from home, putting down the street at 40km/h, not down the straight at EC at 220 km/h and 7500rpm!

dazmo Proficient

dazmo

Posted
Posted

I would be pissed mate that is why i do all my own work as some of these so called reputable workshops are pretty clueless and charge people a fair amount for the pleasure of them stuffing things up :bunny: . I have a prepped stnd crank here 33pump drive grub screwed and nitrided is .25 from memory but will have to give it a measure up to be sure pm or call me if you are interested mate as is ready to go. hope all goes well for you and you can get it sorted for the next time attack day mate. Will have some pricing on the dry sump gear for you in the next few days aswell will shoot you a pm as oon as i have it all worked out.

dazmo Proficient

dazmo

Posted
Posted

PM on its way in a few days Merli is definatly a worthy investment once you get your good engine on the go. I asume that you are running an ATI balncer on your car just need to know what balancer as the pump drive prive varies a bit depending on balancer.

Merli Grand Master

Merli

Posted
Posted

Running a Ross Tuffbond balancer on my current engine, will see how it goes.

I'll be selling this current engine complete, so will be building a brand new engine from scratch once I replenish my party fund...

dazmo Proficient

dazmo

Posted
Posted

Will be able to give you an idea of pricing as i dont think the machining required for the ross balancer will be much different than the ATI but as i have not made a pump drive for the Ross balancer I would need to get my hands on one to make some measurments for the machining is you decided to stick with the Ross. But in saying that ATI for the win in IMHO.

Angus Smart Grand Master

Angus Smart

Posted
Posted

A similar thing happened to me too Mick, but i think it was me who did the damage.. i changed the timing belt and did it up VFT.. little did i know it needed to be VVVVVVVVFT

But it was dew for a rebuild anyway, the n1 bottom end will only take 1.8 bar for so long :)

Beer Baron Grand Master

Beer Baron

Posted
Posted

tektrader is right. they can easily be welded and machined smooth again. it's only the surface for the balancer to sit on. but mikes problem is not just that visible damage, he has a smashed oil pump and from memory it's picked up a bearing so most likely journals are damaged too. if it was just those little bits on the snout then for sure it can be fixed no problem.

wrxkilla Mentor

wrxkilla

Posted
  • Author
Posted
forgive my ignorance, but why are marks on the snout such a concern?

crank is integral to balance of engine and subsequently with mass missing it wouldnt have perfect balance.

Thanks Daz - have sent you pm. Interested in your crank.

Mick

Beer Baron Grand Master

Beer Baron

Posted
Posted
cheers. thanks for the reply. i really didnt know a mark on the very end could make such a big difference!

on it's own it doesn't unless it's causing the balancer not to be mounted properly. if that is the case then it's spinning off it's axis which will be doing things no good at all. that could well have been the case with micks. you certainly wouldn't use a crank looking like that but i's easy enough to remove keway, weld then machine the crank snout, press in new keyway and away you go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • perry_r33
      Skyline R33 Sedan Tail Lights S2 - (2 SETS Available) Silver & Grey

      By perry_r33 · Posted

      Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...