Jump to content
SAU Community

Recommended Posts

ok when im driving and i rev it to 5000 rpm it makes this weird noise its almost like its tapping out but it taps out really fast like brbrbrrbrbrbrbrbrbr lol its never happened before so if u know what it is or could be then please let me know

also when i got my exhaust put on i asked them for a decat pipe so they just welded in a pipe but that sensor that goes into the stock cat yer they didnt put that in should it be in there or doesnt it really matter could this be my problem?

the tapping and brbbrbrbrbr is the engine detonating / misfiring

stop loading the engine up, stop loading it up on boost and find out the cause

likely causes

- boost too high

- crap fuel

- broken vac lines etc

- mangled boost controller

- poor boost control

- unlimited boost

- issues with fuel delivery - too lean, pump dying, rail shagged, injectors shagged

when did it start?

what did you last change?

what ecu? what boost control?

what other mods?

so your using a boost controller of some sort?

I thought it might be detonation but its to hard to tell... can u desecribe it any better?

Does it push through the miss or does the miss at 5000 stop the car from reving any further

Just put as much info as you can think of up here and ull get a better answer

even if you think its pointless information just put it up anyway.

sounds like a rev limiter at 5k lol. coils wouldn't be constant enough to literally hold it at 5k. neither would fuel delivery or boost problems.

think you need a better description. if it intermittently cuts out then it could be any of the above but if it drives perfect up to 5 then holds it there....

yer it runs fine up until 5000 rpm its like a car tapping out but faster tapping if that makes sense i dont really hold it i mean like as soon as i hear it i back off or just change gears so i dont know if it goes away or stays but i f*kin want it gone bad how can this be solved like can i put the car on a dyno n find the problem or do i have to just keep replacing things until it goes away

nah it happens whenever i boot it i mean it just started happening on sunday and i kinda didnt pay to much attention but it happened again today in third gear so i havent actually driven the car to see when it happens cos im to scared that sumthin is gonna f**k up

you'll only get guesswork here because it can be so many things... sounds like something you should be taking the car to a performance car specialist/mechanic for. Get it on the dyno and let them figure out what the problem is before it becomes worse.

no it's not a 'ping coming from the exhaust'. I'm sorry but there is no such thing.

a hole in the exhaust will not cause an engine to ping, nor will it cause a missfire, nor will it cause the engine to cut at 5,000rpm. all it will do is leak exhaust gas which will make the car sound like it has an exhaust leak.

it's pretty hard to diagnose over the net. take it to a mechanic.

yer i took it too boostworx today and they said its probably missfiring so ill get them to get it on the dyno

but today i drove it too see if it would stay at 5000rpm n not move or once it got past 5000rpm it would be fine and it didnt do it at all so i dunno whats going on there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...