Jump to content
SAU Community

Recommended Posts

controller is too easy...I hooked up my wheel and hyperdrive, set it all the stuff off...and geez it is a lot better... mind you I can't control an MR car to stay on the track once the back end breaks but it sure is fun :(

Those that think the driving isn't 'realistic' enough for them really need to turn off t/c, asm, abs, etc. and you'll see how bad you really are...

been trying out B Spec...I dunno about you but it looks so pointless. There's really not much you can do in terms of management...and how do you make the time go quicker? GT4 you could do it double time to make it go quicker...

The amuse carbon R, you win it at some point (I did), so don't bother buying it.

are you f**king kidding me i spent 250 000 on it today..........

its lots of fun to drive. Not as quick as a fully worked R35 but more fun. Basically a carbon fibre RWD 34R

I finally purchased a R33 GTR and it's exactly like the real thing! Right down to the way the ATESSA-ETS catapults the car the other way if you counter-steer mid-corner with your foot on the accelerator! Not too sure about the sound of the engine though, my old rb26 didn't sound like that, lol.

Those that think the driving isn't 'realistic' enough for them really need to turn off t/c, asm, abs, etc. and you'll see how bad you really are...

do you mean to say people actually use all that BS? i've had everything off, except abs on 1 because i would lock up every time otherwise. the joys of the controller

yup, all the TC etc off, except 1 notch of ABS. only way to drive.

i prefer to do it more like how the car comes from the factory. old cars i turn abs off. new cars that have abs standard i leave it on.

shits me off when people say "pfft, you are driving with abs on, i have it turned off so it's more realistic" when you are talking about a car that has abs standard, because it would be more realistic to leave it on and possibly even turn it up a few notches, LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...