Jump to content
SAU Community

Recommended Posts

Hey guys.

So I am doing a bit of research in preperation for a big upgrade for my car (pending results of a compression/leak down test :) )

Obviously what ECU you use is important and is a fairly large part of the upgrade expense.

Anyway I know every man and his dog has a Power FC, mainly because they are tried and tested and are known to work well. Which is all well and good. However they are fairly old now, are still quite expensive and are starting to get hard to come by. (Sort of anyway)

I was looking at finding a PFC and chucking on a z32 afm.

However, what are peoples thoughts on the Haltech Platinum Sport 2000?

Suposedly plug and play, comes with a built in map sensor (so no buying a z32)

Supports all sorts of funky things like Anti-lag and launch control (I am fairly sure the PFC doesn't)

Overall it seems to be more advanced then the PFC.

I did a search for Haltech related threads but there seems to be very little info regarding the PS2000.

If the PFC is still the better option, why? Are Haltech's horrible to tune? Do they not handle skylines well or something??

Link to comment
https://www.sau.com.au/forums/topic/275215-haltech-ps2000-thoughts/
Share on other sites

The Platinum Sports ECU's replace the Haltech E11 and E8's im pretty sure. haltech has a reputation of being a very good ECU, plenty of people on here run the E11's. Only downside I see is that the PS2000's dont use knock control which is why it may be worthwhile considering a ViPEC or Link if your running a street car, but then on the other hand neither does PFC...

Ok thanks for that. Sounds like the Haltech isn't such a bad option. Not sure if the tuner I plan on going to is familiar with Vipec/Link, I think he more does Power FC and Haltech,

there is your answer, the ECU is really only as good as the tuner and you are more likley to get a better result with ecu's your tuner is familiar with

there is your answer, the ECU is really only as good as the tuner and you are more likley to get a better result with ecu's your tuner is familiar with

Totally agree, talk to your tuner and see what they recommend.

Cheers

Johno

Yes, and from what I understand although he has done Many PFC's, he is very experienced in Haltech, which got me looking at them. I was just kind of curious to see if there was any known issues regarding the PS2000 and skylines that others might have come across.

can you run a PS2000 on AFM's? or does it only work on a MAP sensor? I know the R35 and 370z one's use the AFM.

Yep you can still retain your AFM's with the Platinum 2000 and Platinum 2000 Pro. It also has a built in 2 bar MAP sensor.

Cheers,

Johno

I'm running a Platinum 1000 and can't complain, car runs very well and so far it seems very good on fuel, I've only driven it a couple times since its been installed and tuned.

I chose to run a 3 bar map sensor as it was cheaper than a Z32 and also with running the "external" map sensor I didn't have to run a vacuum line inside the cabin to the ecu.

  • 4 weeks later...

Haltech's are bringing out new Ecu's specifically for the R33 + R34's but they will be a few months, i dont know too much beyond that.. but i was talking to hitman about getting a 2000 and he said might be better to wait it out.. which i need to do anyway.. still gotta buy injectors etc.. so just buying all the goodies first, ecu last.

picking an ECU is a pretty important part of modifying your car

selecting the wrong ECU can cost you time, money and lots of frustration

the ECU plays a crucial role in how the car acts, runs, performs and drives

forget the max power rwkw for a moment and think about the important things to you and your car

essentially any ECU you choose will make the same power etc so thats not important

most people when they pick an ECU go - oh sick, no AFM, or sick as, it has anti lag, spark cut, pro launch etc

these are good buzz words but if your car is an average street car that you drive normally and it has a bit of power

whats the point of all these fangdangle features and junk? will they add any value or do they just sound cool?

the most important things for an ECU for a mild street car are - start first shot, cold start, fuel economy, ease of tune, resale value, plug and play and a simple interface. all of these "nice" features are thrown in the bin when you have to wire it in, have only 1 or 2 tuners who can tune it, if it ditches some of the factory sensors in place of aftermarket ones or has annoying operability.

you should understand the key differences between the various forms of technology to understand how the car wil be before/after the change.

do some reading on map sensors and airflow meters to understand which may be better in your situation and why

most people go - oh sick, it uses a map sensor, thats gotta be better - do some reading and double check, you may be surprised

be careful when selecting an ECU thats new on the market or isnt very common

when you are looking at these ecu's factor in how many workshops can tune it and how accessible they are

there is no point having the latest greatest ECU and only 1 workshop in your state can tune

then you are locked into their pricing, their service and their "timeframes" etc.

you will find on this forum a lot of people and probably some tuners, are biased towards the apexi powerfc

you will find this is simply due to their ease of use, access to trillions of tuners, cost, and plug and play

where's dirtgarage to flog the crap out of vipec yo

Nothing wrong at all with the Vipecs.

I know of one car currently being tuned in time for Jamboree with the new Haltech Ps2000, 13B engine with a T51R, so far they are having very positive results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...