Jump to content
SAU Community

Recommended Posts

good afternoon. i installed my intercooler (hybrid) its been a while no hassles but, the pipe to the throttle body was hitting my fan and fan housing. i ended up becoming a touch frustrated and cut the fan in half. what can i do to fix this backyard job of mine

Link to comment
https://www.sau.com.au/forums/topic/275528-hybrid-intercooler-pipes/
Share on other sites

im not sure maybe a thermo set up cause it won't take up as much space. is there any critical differences? i want to get my car running ideal, and tidy up my engine bay before more mods. whats involed in a thermo set up?

i only have at the moment walbro pump, cooler, boost controller, turbo back exhaust, dump pipe.

I have a HYBRID GT cooler on my 32 and no drama's with clearance but a mate does/did with his.

ONLY thing that can cause the issue is where you bore the hole under the battery tray which will sit the top pipe slightly forward hence hitting the fan. Either massage the hole out so the piping sits back a little further or trim the blades on a new fan. Personally i wouldn't worry about changing to a thermo set up :)

on my old setup i cut the edges off the fan with a breadknife while still on the car... easy

now i have a new front end and this time i sat it above the fan and cut a lil hole in the bonnet's crossbar where it scrubed

i had a hybrid kit and i just took the corners off the back of the blades. took a section about the size of the top half of your thumb off each blade and it cleared. that way the blades were still the full length but just not quite as wide at the tips

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...