Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I think it's called facepunch.

it's sick.

what happens is, every time somone starts a which bov thread, this device punches the kunt in the face.

you should get one.

wow your funny. i tried searching for it and i couldnt find 1.

how about u come and try punch me in the face, i hate e-thugs

i didnt tell u to come in here and reply so f#%k off loser

I want to know what the best SOUNDING BOV is and also what the best PERFORMANCE BOV is!

they could be different BOV's or it could just be 1 that has both great sound and great performance.

i want flutter at low rpm if possible.

flutter at low rpm?

You can buy something like a Tial or a Turbosmart V-port. You'll have to wind the spring tension right off so it'll probably open up if you run any kind of real boost.

Ive been wondering about that bov from GFB i think which you can change from full atmosphere to plumback jst by twisting it. Fact is bovs are illegal so you might as well stick with stock gtr or jst dont run anything at all so you get the low rpm flutter your after.

Ive been wondering about that bov from GFB i think which you can change from full atmosphere to plumback jst by twisting it. Fact is bovs are illegal so you might as well stick with stock gtr or jst dont run anything at all so you get the low rpm flutter your after.

BOVs are only illegal in VIC and SA. Definitely ok in QLD. We don't have the same EPA laws they have. I think that is changing soon but for now it's all good.

Dunno where this guy lives though.

BOVs are only illegal in VIC and SA. Definitely ok in QLD. We don't have the same EPA laws they have. I think that is changing soon but for now it's all good.

Dunno where this guy lives though.

I got defected for BOV VTA a couple of months ago around the corner from the erd head office :P should I have contested it?

OP: I have a Tial 50mm sounds good just a nice quick exiting of air no silly putchuu chu cheeeee ft ft chu

If your car is stock why do you want to chang it?

A fully sik uleh BOV can increase a car's performance by 50% the longer the flutter the more powah it makes.

WTF is a performance BOV? if you want a "performance BOV" use the stock one!

bought a r33 with hks bov fitted already. car stalled randomly, swapped it with someones stock one, they were stoked, now it runs fine. moral of the story is they attract attention from cops, they do f*@k all for performance, illegal in some states, and can actually make your car run shit if its running a stock ecu! be an individual keep the stock one and save your money for something that needs fixing. if you drive it like a man that that shouldn't be long:)

  • 9 months later...

all the bovs basically makethe same pshhhh shit except the cheap oones will prob break or leak under more boost if you want a bov noise get a good branded one but my opinion since they are the first thing cops look for just block stock one off and flutter away sounds better than bov and not defectable and also should have your car tuned to running with atmos or no bov to help with the stalling and stuff or if you dont tune it gona have to adapt your driving style so it doesnt stall.

dose pipe with multiple bends to amplify the kilowatts generated by the fluttering

dude there messing with you

the flutter although it sounds great it actualy doing damage to you turbo!!!.

if you have your bov spring too loose it doeasnt vent properly so the air is forced back through your turbo (the wrong way ) to the

doooo dooo do do dod do do noise you hear is the blades of your turbo cutting through the air .

as for bov increasing power im no expert but if that were true it would be stated in the sticky about skyline power mods .

I want to know what the best SOUNDING BOV is and also what the best PERFORMANCE BOV is!

they could be different BOV's or it could just be 1 that has both great sound and great performance.

i want flutter at low rpm if possible.

Flutter is caused by the lack of a BOV. Theres another 11ty billion page debate thread on whether its dangerous or not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...