Jump to content
SAU Community

Recommended Posts

Well i have been looking for a number of months now and have missed out on a few in the 3-4k price range. My mate found this car at our local wreakers and i thought what the hell i sould be able to get it on the road for the cost of those other cars but i will know whats in this one.

Frist day i got it, we got it running in about fours had a blocked fuel line.

post-9955-1247200398_thumb.jpg

post-9955-1247200405_thumb.jpg

post-9955-1247200413_thumb.jpg

So the next day i went out and brought all the filters and oil to change it all.

post-9955-1247199715_thumb.jpg

It didnt like the new oil as it sounds like it mite have sun a bearing. Not that this worries me much the motor was coming out anyway now i will just do a full freshen up and know what i have there.

Here are some pics i took today inbetween the rain

post-9955-1247199754_thumb.jpg

post-9955-1247199760_thumb.jpg

post-9955-1247199814_thumb.jpg

post-9955-1247199833_thumb.jpg

You can see the small tear in the drivers seat that and the badge missing on the drivers door only bads points inside the car.

post-9955-1247199845_thumb.jpg

So that brings us to the bad points the rust i have to flamin mongrel out and sand back before a respray

You can see someone fixed this guard before with bog and didnt do a good job

post-9955-1247199769_thumb.jpg

Normal bonnet thing

post-9955-1247199789_thumb.jpg

Surface rust on the roof.

post-9955-1247199800_thumb.jpg

There are a few offer things to do like the fuel cap dosnt close looks like its missing a piece to it but this is where it starts i will post up photos as i do things but this is a slowish project. Will be getting fender mirrors and a front lip i think too.

Going for something like this lol

post-9955-1247200322_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/278602-240k-project-4dr/
Share on other sites

For a daily driver the 240K still does well. I used one 'til recently for getting around Sydney. 34 year old 240K still more comfortable than a 2003 Hilux :rofl:

Here's a bit of inspiration for ya! I add more as I find 'em.

post-11983-1247223789_thumb.jpg

post-11983-1247224072_thumb.jpg

Edited by 72GT

So i started some of the stripping today.

post-9955-1247552352_thumb.jpg

post-9955-1247552344_thumb.jpg

post-9955-1247552363_thumb.jpg

Only down side is the Passanger side guard is as bad as i thought tho the damage was not as bad inside as it could have been

post-9955-1247552371_thumb.jpg

And i have started to paint the wheels back to black aswell.

post-9955-1247552380_thumb.jpg

Am going to pull the seats and carpet tomorrow i think if i can find some where to keep them.

So i did today what i have been putting off i went and checked for rust where i though i would find it and some spots i didnt know about.

The rust i sort of knew about

post-9955-1247720773_thumb.jpg

post-9955-1247720778_thumb.jpg

post-9955-1247720890_thumb.jpg

post-9955-1247720903_thumb.jpg

The suprise

post-9955-1247720796_thumb.jpg

post-9955-1247720851_thumb.jpg

This is thanks to someone at the wreakers not closing the back passangers door right

post-9955-1247720867_thumb.jpg

post-9955-1247720882_thumb.jpg

this is what it would have looked like if it didnt have that slow leak from the door

post-9955-1247720804_thumb.jpg

Well thats some of the bad bits now here are some of the better things

post-9955-1247720784_thumb.jpg

Originals

post-9955-1247720839_thumb.jpg

Original keys

post-9955-1247720821_thumb.jpg

So looks like i will be pulling out the windows now to see the how bad the rust is there too.

post-9955-1247721552_thumb.jpg

NOTE:

You may have noticed this thread has been moved.

SAU Admin have decided to run a new section for "Projects, Overhauls and Build-ups"

As such your thread is a prime example of what we wanted to house in this section.

We have left links in the sections you originally posted also to allow easy access to the threads new home.

Any issues, please feel free to pm myself or N1GTR.

Cheers Col

  • 1 month later...

Well things have slow down i decided to fix my GTR so not much has been happening on the Datto.

Engine and auto are out tho.

Engine Crane

post-9955-1251359430_thumb.jpg

Took the motor out frist

post-9955-1251359419_thumb.jpg

then decided i wanted the auto out too

post-9955-1251359397_thumb.jpg

plenty off room now.

post-9955-1251359411_thumb.jpg

post-9955-1251359447_thumb.jpg

The reason for the water leak this is the thermosat housing and hose which looks like it was just all stuck together lol

post-9955-1251359497_thumb.jpg

This is the product im coating the car in to fight off rust.

post-9955-1251359456_thumb.jpg

mate if u ever need parts pm me i have a few 240k's and heaps of engine parts i mean heaps of engine parts. use to go threw these L series engine on a monthly basis haha lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...