Jump to content
SAU Community

Recommended Posts

Took a half day and worked on the top end from 12-11. About half this was already done from a few days ago...

Pistons and rods installed:

fuellines01.jpg

Rods

fuellines02.jpg

Upgraded oil pump drive collar...

fuellines03.jpg

Windage tray on:

bottomend05.jpg

Oil pump on:

bottomend06.jpg

Rear main on:

bottomend07.jpg

Oil pan:

bottomend08.jpg

Oil pan baffles installed

bottomend09.jpg

Oil pan and motor mounts installed:

bottomend01.jpg

Other side:

bottomend02.jpg

Link to comment
https://www.sau.com.au/forums/topic/278761-pics-of-my-motor-build/
Share on other sites

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Water pump on:

bottomend03.jpg

Water pump pulley on

bottomend10.jpg

Alternator on:

bottomend11.jpg

Head on:

topend01.jpg

Intake manifold on:

topend02.jpg

Coolant pipe on:

topend03.jpg

Balance tube and IAC valve on (also a ghetto hose clamp in the middle of a hose trying to relieve a kink):

topend04.jpg

Kink fixed with prebent tube, waterneck on:

topend05.jpg

Injectors and oil filter in:

topend06.jpg

Fuel rail on:

topend07.jpg

Plenum on:

topend08.jpg

Cams in, with custom valve shims... :blush:

topend09.jpg

Timing backing plate:

topend10.jpg

Timing gears and belt installed. All tensioned:

topend11.jpg

Rocker covers on:

topend12.jpg

Another shot:

topend13.jpg

Everything else. It's not really pink in person, it's more purple. The camera just doesn't represent it very well.

topend14.jpg

topend15.jpg

topend16.jpg

topend17.jpg

topend18.jpg

topend19.jpg

topend20.jpg

Engine mod list:

•R32 Nissan Skyline GT-R RB26DETT

•87mm bore/3 angle valve job

•Wiseco 87mm Pistons

•Eagle Rods

•HPE Crank collar

•ARP head studs

•ARP Flywheel Bolts

•ARP Exhaust manifold studs

•EPP valve guides

•Ferrea Dual valve springs

•Ferrea Valve spring locators

•Ferrea Retainers

•Ferrea Locks

•ACL Calico coated main and rod race bearings

•Garrett GT35R .82 A/R

Tial 38mm WG

•Spitfire Coilpacks

•New OEM Water Pump

•New OEM Oil Pump

•Trust Timing Belt

•Powdercoated valve covers

•OEM gasket kit

•Cometic MLS Head gasket

•Polished alternator

•ATI 1000HP Race Damper

•Custom valve shims

Rest of the car:

Chassis:

• 1987 BMW 325IS (manual)

•Seam Welded

•Vito Antonicelli 10 Point Cage

•Every suspension member powdercoated

Body:

•Ireland Engineering Fender flares

•OEM Mtech1 Valences and Sideskirts

•Euro Bumpers, Dechromed

•Shaved Side Moldings

•Shaved Fuel Door

•Shaved Sunroof

•Custom baby puke paint

•Newman Engine Mount

•Newman Transmission Mount

•Custom Tunnel

Transmission:

•Modified RB26DETT Transmission

•Nismo Flywheel

•EXEDY 3 puck clutch

•Custom Driveshaft

•E30 M3 LSD 4.11

Fuel:

•Bosch -044 800HP fuel pump

•Seimens 870cc injectors, flow calibrated to w/in .5% of each other

•Summit 8 Gallon Fuel Cell

•Custom Fuel Cell hold down straps

•Custom Fuel Rail

•Braided -8AN Fuel inlet line

•Braided -8AN Fuel feed line

•Braided -8AN Fuel return line

•Aeromotive Rising rate regulator

•Summit Inline fuel Filter

•Custom filter and pump mounting brackets

Exhaust:

•Newman 304SS heavy wall manifold

•Newman 304SS exhaust

•Tial 38mm wastegate

Induction:

•Newman 304SS IC Plumbing

•PWR 24X11X3 IC core semi-custom endtanks

•Tial 50MM BOV

Cooling:

•MOXIES/Newman Radiator

Electrical/Management

•AEM EMS Speed Density Engine Management

•AEM UEGO controller

•AEM Serial Gauge

•HKS Turbo Timer

•New Engine Harness

•Kwikwire Chassis harness

•(4) Greddy warning gauges

Suspension:

•Ireland Engineering road race springs

•Ireland Engineering poly trailing arm bushings

•Ireland Engineering Poly Subframe mounts

•Ireland Engineering 22/25mm swaybars

•Ireland Engineering Camber/rear toe kit

•Bilstein HD Dampers

•New OEM wheel bearings

•New OEM F&R strut mounts

Wheels:

•Work VS-XX wheels (17X10, 17X8.5) Custom Offset

•Falken Azenis RT-615 275/40/17, 245/45/17

•Vorshlag 90mm wheel studs

Interior:

•Sparco Evo Seats

•Corbeau Harnesses

•Sparco 300mm steering wheel

•Rhinoliner interior and trunk

Brakes:

•Wilwood billet forged superlite narrow body, differential bore 6 piston calipers (front)

•Wilwood superlite 4 piston caliper (rear)

•Wilwood 13X1.1 GT48 rotor (front)

•Wilwood 11.75X1.25 HD rotor (rear)

•Cutsom machined rotor hats and brackets

•Massive rear hat, ebrake ring and bracket

•Wilwood Q pads

•New OEM ebrake setup (backing plate, springs, adjusters, cables, pads, actuator, pin)

•Wilwood Prop valve (installed next to driver’s seat)

•Custom Brake Booster

•Polished Master cylinder

•-4AN stainless brake hardlines

•-4AN stainless braided brake hoses

For more interesting engineering crap, check out this link where I made custom valve shims from scratch...

http://forums.gtrcanada.com/showthread.php?t=46321

you need to check the crank, where the crank collar is put on is the collar flush with the crank? this cost me a crank and it had to be replaced.

was it machined flush ? if not then it will need to be done.

you need to check the crank, where the crank collar is put on is the collar flush with the crank? this cost me a crank and it had to be replaced.

was it machined flush ? if not then it will need to be done.

Is what part machined flush?

The face where the timing gear rides or another side?

The crank collar came with detailed instructions from Horsepower Heaven, which was supplied to my machine shop.

What happened to your crank?

Edited by ctnewman
Wow looks good man. Keep us posted how you go. Couldn't keep the power steering with that exhaust manifold ay?

Haha, no, but I wasn't planning on putting PS in the car from the beginning. I really wanted an ATI damper with only the waterpump/alt pulley on it, but they said they don't make one.

not a bad idea...heard of them with everything from blown 350 chevs through 2jz's now rb swaps....im glad im not paying for the build tho!!!

planning to have it street registered or purely show/track car?

i'm gonna street the shit out of this car!

my other street warrior:

lotus2.jpg

lotus3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...