Jump to content
SAU Community

Recommended Posts

you'd also have a much bigger migraine from all the running around and a smaller bank balance.

the lancer wagon fails the silhouette test.

why not grab a Caldina wagon? It's almost the same form factor.

Spot on, I currently am driving a manual Caldina actually. It's a 2002 model so last of the ST215.

It's a really great car actually.

I was just trying to bring the Evo back into light to see if there was a chance of import.

Personallly I'm not a fan of the Legnum, I would chose an M35 over it if I needed a bigger car.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

...but the legnum is essentially the same size as lanevo wagon isn't it?

=/

i bow out of this thread - i don't know enough to comment =)

legnum : evo wagon = bus : van

rowan,

ST246 is far from slow if driven correctly. I had the privledge of two of these . one was a bit slow - the second (N spec) was far from slow.

also with the EC5W - that is a V6 (6A13 I think) the amount of dicking around to make the thing fit and get the AYC behaving properly would be a nightmare.

I also get the idea that he wants an evo wagon. to me it would be easier to buy an evo 9 chop and build one. only issue I can see is the rear floor being different. (give me a current verion of CATS and I'll tell you.)

my 2c.

Legnum is bigger than an Evo.

If you want a fast wagon, save your pennies and get an Audi RS6 Avant :whistling:

yep! (though servicing the thing may hurt a bit.)

  • 8 months later...

Hi guys

I'm in Japan at the moment, and thinking of heading back home next year with one of these as a personal import. What kind of interest would there be in Oz, and would I be able to sell it quickly? What kind of money would people be looking at parting with for one of these? Let's say a '05, with less than 50,000km on the clock. Automatic unfortunately (the manuals are rare as hen's teeth).

I'm just deciding which car to get out of this or an 2008 Exiga GT to sell back in Oz. I think the Evo wagon would be a better choice - surely it'd be the only Evo wagon in the country.

Hi guys

I'm in Japan at the moment, and thinking of heading back home next year with one of these as a personal import. What kind of interest would there be in Oz, and would I be able to sell it quickly? What kind of money would people be looking at parting with for one of these? Let's say a '05, with less than 50,000km on the clock. Automatic unfortunately (the manuals are rare as hen's teeth).

I'm just deciding which car to get out of this or an 2008 Exiga GT to sell back in Oz. I think the Evo wagon would be a better choice - surely it'd be the only Evo wagon in the country.

I see manuals at auction all the time. There wouldn't be any difficulty finding one, the only difference would be the price.

As for how much you could sell it for, it seems increasingly difficult to make a profit from imports these days. Yes it would be unique, but finding someone that appreciates it might be difficult.

As for me, I would love one. But I don't like paying peoples profit margins. >_<

Edited by Blitz_boy

I see manuals at auction all the time. There wouldn't be any difficulty finding one, the only difference would be the price.

As for how much you could sell it for, it seems increasingly difficult to make a profit from imports these days. Yes it would be unique, but finding someone that appreciates it might be difficult.

As for me, I would love one. But I don't like paying peoples profit margins. >_<

Cheers, will have to check into the auctions more then, a manual would be ideal.

As for price...well I have done a personal import before and while it is rewarding, it is no stroll in the park and there are loads of risks, so I'm not gonna do it for or cheap. I'm not running a charity here, although I would like to give someone the opportunity of owning a car they otherwise wouldn't be able to get their hands on.

  • 1 month later...

so can these be brought over and put on our roads legally? like seriously i think these are hot as F*** because of the shape plus there isnt anything over here to compete with them thats not imported. (stagea, toyota wats it called) only thing i can think of over here is a wrx is id take the evo anyday lol. if anyone needs more proof of their brilliance search youtube for evo 9 wagon vs rs5 audi lol

That sounds promising. Its still a toss-up between the CT9W, SG9 Foz or the Honda FD2R you mentioned. This guy sold his civic for $75k. He sounds like a right cvnt though:

http://firesport.com.au/2008-mugen-rr-eoi-car-trading-point-sales--ad181884.htm

  • 1 year later...

Resurrection Time...

JapLink Motors - now JLM - has successfully been able to comply the Mitsubishi Airtrek.

Some other importers in Sydney have had trouble with getting "emissions" testing passed.

JLM does not keep stock. They will accept orders as I'm sure Iron Chef will too.

Legnum is bigger than an Evo.

If you want a fast wagon, save your pennies and get an Audi RS6 Avant wink.gif

Better still: In 3 years time, an AIRTREK off you-know-who

FYP for Bill's sake ^^^ - lol

FYP for Bill's sake ^^^ - lol

Haha Terry, I knew that my clarity at 3 am wasnt going to do me any good.

I understood that it was the Airtek, my enthusiasm must have made it out as if I thought it was the evo.

Although I'm not directly interested in the Airtrek, I just think its awesome when we get something in our favour as opposed to not having it at all.

We have enough beautiful cars that are restricted for Australian road use/importing. One less unrestricted, one better for the Japanese car community and enthusiast in general here in Australia..

Edited by GTR_77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...